Forum Replies Created
-
Posts
-
Re: Neff V5340x0GB/03 error code E13?? intermittent no spin
Fitted a new interlock and, touch wood, 24hrs later it’s still ok. I think the weight of water was pressing against a dodgy/loose interlock, causing intermittent E11 and E13. The fit of the interlock on this machine is appalling – there is at least 1mm play from side to side, and therefore the screws need to be bloody tight. I suspect that, over time, the interlock is forced back in its slot, and starts to engage less positively.
Re: Neff V5340x0GB/03 error code E13?? intermittent no spin
Hi nomadPaul, interesting you mention the door interlock, as the door as quite loose on its hinges as if it’s been leant on, and I wonder whether this might be the cause of the E13. I suspect that there is also an intermittent drain fault though. Apparently it’s had very little use, situated as it is, in an infrequently used holiday flat
Re: Whirl AWO10561 door light flashing and F11
Seven yr old machine. advised customer over phone that if a new board was required it would be expensive, so she’s buying a new one. Shame, I fancied having a go at at. Anyway thanks v much for your help
Re: LEC T2855W – Valve
Hi,
Any luck with this yet? I’ve come across exactly the same fault today although I didn’t get as far as testing continuity across the diverter. I notice that this and the control module come top of the list on a Connect Dist search.
Re: Ariston A1637 delay timer and door lock indicators flash
Machine now done a cold wash and a forty wash with no problems. I’m guessing wiring from NTC to board may have been the culprit – it certainly didn’t seem to be a very positive connection. Thanks for all your help Jim
Re: Hotpoint DWL DEA602S fills, drains and error code
FDM550P.R
it’s still not in the list you directed me to, but it’s close to one of them.
Re: Ariston A1637 delay timer and door lock indicators flash
So, given that everything else seems ok, it looks like a PCB fault do you think?
Re: Hotpoint DWL DEA602S fills, drains and error code
Hi Jim,
That’s all I’ve got, taken from side of machine.
Re: Ariston A1637 delay timer and door lock indicators flash
BTW it’s now gone through a complete wash cycle with ‘no heat’ selected
