[Washman]

Re: Bosch washing machine not rinsing properly

Hi

According to the specifications this machine has an Allergy+ program. Which normally means better rinsing.

Washman

[Washman]

Re: Bosch wae24166gb/06

Hi

Have you checked the filter.

Washman

[Washman]

Re: Fitting Bosch dishwasher aquastop water inlet to water s

Hi

It should just screw onto the tap/valve that the old hose screwed onto.

Washman

[Washman]

Re: Bosch machine spin

Hi

Full model number Enr*******GB/** required.

Washman

[Washman]

Re: Bosh classic XX6

Hi

Full model number Enr*******GB/** required.

Washman

[Washman]

Re: Help with a washer please

Hi

It is no good checking element with a multimeter you need a Megger to check for earth faults. A megger uses 500/1000 volts to show condition of element.

Washman

[Washman]

Re: Hoover Dishwasher HED 6612-80

Hi

It means that if the power supply is interrupted the machine will continue where it stopped when power supply is restored. ie: power cut etc, you cannot reset program by turning machine off.

Washman

[Washman]

Re: Firenzi FSF650SS timer issues

Hi

Have you set the clock to manual if set to auto , it will only work with a start and end time set.

washman

[Washman]

Re: Kuppersbusch washing machine problem

Hi

The machine is not designed for continuous use ie: one load after another ,it needs to cool down between loads.

Washman

[Washman]

Re: Cannon Kendal cooker top oven element.

HI

Model number would help

Washman

[Washman]

Re: Panasonic drum bolts plastic cover

Hi

The model number would help people to solve your problem.

Washman

[Washman]

Re: Miele T4262C heater – fix or replace?

Hi
IF the machine is still in good working order apart from heater. it would be cheaper to replace heater than buying a new Miele TD.
Miele are built to last. I have worked on Miele appliances that are 20 years plus, and still worth repairing.

Washman

[Washman]

Re: Proline dishwasher lost all power mid-cycle

Hi

You need to test for earthing faults on dishwasher before thinking about new PCB/control module , as PCB’s are a non returnable item once fitted.

Washman

[Washman]

Re: Brand new Beko VM 7043 CW squeaking, LOUDLY! 🙁

Hi

Have you made sure you removed all of the packaging, some have polystyrene foam blocks underneath by the motor that people forget to remove.

Washman

[Washman]

Re: Rosieres Diswasher LVI990

Hi

Fault codes sometimes tell porkies you need to check the element with test meter to be sure, earthing faults can cause the wrong fault code .

Washman

[Author]

Posts