Washman

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 894 total)
  • Author
    Posts
  • in reply to: Beko WM1512S Washing Machine not filling with hot water #417299
    Washman
    Participant

    Re: Beko WM1512S Washing Machine not filling with hot water

    Hi
    Most machines if they are hot and cold fill, only take hot water on the very hot washes. There is a heater in the drum to heat the water to the correct temperature, so you may not get hot water going into the machine.

    Washman

    in reply to: Rosieres Diswasher LVI990 #417580
    Washman
    Participant

    Re: Rosieres Diswasher LVI990

    Hi

    How do you know the element needs replacing if you do not know where it is. It might not be the element that has failed , the only way to be sure is to test the element with the appropriate test meter.

    Washman

    Washman
    Participant

    Re: All of a sudden glasses are cloudy, feel "residue" on th

    Hi

    Make and model number might help with diagnosis.

    Washman

    Washman
    Participant

    Re: Smeg Cooker missing its upstand – is this a problem??

    Hi

    The up stands are low glass panels to go each side of the splash back along the wall, so cooker will work OK without them.

    Washman

    Washman
    Participant

    Re: whirlpool american washing machine fills at end of spin

    Hi

    There should be a wiring diagram in the control panel.

    Mike

    in reply to: Hotpoint AQ113D697E – Tub Leak #414850
    Washman
    Participant

    Re: Hotpoint AQ113D697E – Tub Leak

    Hi

    That looks like the bearing seal is leaking.

    Mike

    in reply to: Any experts know this model? #413974
    Washman
    Participant

    Re: Any experts know this model?

    Hi

    Is the oven gas or electric.
    You need to remove oven from housing and look for a label.
    Also a better picture of the control panel of the oven might be a good idea.

    Washman

    in reply to: Bosch Classixx6 1400 error F21 #412885
    Washman
    Participant

    Re: Bosch Classixx6 1400 error F21

    Hi

    The reason he has stopped giving more advice, is because he has no idea of your competence in carrying out any further repair. And if you make a mistake and electrocute yourself who will get the blame, most probably the person giving the advice.

    Washman

    in reply to: dishwasher spray arm hitting dishes #412849
    Washman
    Participant

    Re: dishwasher spray arm hitting dishes

    Hi

    If you have not altered the baskets, it must be that the top spray arm has never been rotating all that time. Going by the pictures its impossible for the arm to pass the plates with the top basket in that position.

    Washman

    in reply to: Smarter Spammers (Internet 101) #411694
    Washman
    Participant

    Re: Smarter Spammers (Internet 101)

    Hi

    I have been getting a lot of E-mails from mms.service followed by four digits then O2 or Vodafone, but none show my E-mail address or name in the header.I looked up “mms.service” its supposed to be multimedia messages from mobile phones.But is being used by hackers and the like.Make sure your antivirus is up to date,and scan all E-mails.

    Mike

    in reply to: AEG Lavamat Turbo 11842 VIT Filling when off #410836
    Washman
    Participant

    Re: AEG Lavamat Turbo 11842 VIT Filling when off

    Hi

    Replace the water inlet valve on machine.

    Washman

    in reply to: EOB5630X oven, grill and internal light all not working #407311
    Washman
    Participant

    Re: EOB5630X oven, grill and internal light all not working

    Hi

    Have you set the clock to manual.

    Washman

    in reply to: Indesit WE16 – F01 blues #125594
    Washman
    Participant

    Re: Indesit WE16 – F01 blues

    Hi

    This is an old posting from 2005 so a bit late to help the original poster.

    Washman

    in reply to: Zanussi 1221W Door Lock Problem #407274
    Washman
    Participant

    Re: Zanussi 1221W Door Lock Problem

    Hi

    the power board Martin said to look at is the main PCB in the top of the machine with all the electronic components on. Not the 13 amp plug.

    Washman

    in reply to: AEG L50815 Bearing change #407209
    Washman
    Participant

    Re: AEG L50815 Bearing change

    Hi

    Replace the tank.

    Washman

Viewing 15 posts - 16 through 30 (of 894 total)