Washman

Forum Replies Created

Viewing 15 posts - 466 through 480 (of 894 total)
  • Author
    Posts
  • in reply to: LG WM-13220FD Door #258664
    Washman
    Participant

    Re: LG WM-13220FD Door

    Hi

    Complete door only I’m afraid.

    Mike

    Lucky Goldstar

    in reply to: teka hob control #258644
    Washman
    Participant

    Re: teka hob control

    Hi

    Teka Part number 60803034 touch control

    Mike

    in reply to: Samsung SL39WJ1 Desperately need user manual #258152
    Washman
    Participant

    Re: Samsung SL39WJ1 Desperately need user manual

    Hi

    The user manual will not help you to solve many problems, and service manuals are not avaliable to the general public.

    Mike

    in reply to: Bosch ClassiXX 1000 #258335
    Washman
    Participant

    Re: Bosch ClassiXX 1000

    Hi

    Have you checked the brushes in the motor yet , most likely they are the problem .

    UNPLUG machine before removing any panels to check.

    Mike

    in reply to: Neff HTET715 #257340
    Washman
    Participant

    Re: Neff HTET715

    Hi

    Bosch E Shop Part no 476984 £129.40 + vat and postage

    in reply to: Bosch Oven #257287
    Washman
    Participant

    Re: Bosch Oven

    Hi

    Bosch E shop still shows that part as OK , at £71.73 GBP

    Mike

    Washman
    Participant

    Re: Servis easi logic 1500 Smelling of burning while washing

    Hi

    Model number and serial number please, then we can advise you.

    Mike

    in reply to: Qualtex on line ordering? #253560
    Washman
    Participant

    Re: Qualtex on line ordering?

    Hi

    Its nice to see that some one from on high takes the time to read the forum , and explain things.

    Mike

    in reply to: Servis m6002w spin problem etc…. #256355
    Washman
    Participant

    Re: Servis m6002w spin problem etc….

    Hi

    Have you checked the filter , if water still in drum it could be that all the water is not being pumped out.
    If water is still in drum when machine gets to spin it will miss the spin out .
    Also at end of program you should always turn dial to stop or reset, to make sure that control module resets.

    Mike

    in reply to: Teka #256140
    Washman
    Participant

    Re: Teka

    Hi

    Have heard that GB DAR are doing TEKA now.

    Washman

    in reply to: connections mediator #256114
    Washman
    Participant

    Re: connections mediator

    Hi

    Log in and look under the word Connections at top of page it says

    Home | Catalogue | Mediator | My Account | My Order | Promotions | repaircare .


    Mike

    in reply to: asko ks7135 thermostat #255412
    Washman
    Participant

    Re: asko ks7135 thermostat

    Hi

    Original asko thermostat part no 3313-3114 ,thats a very old model circa 1993.

    Mike

    in reply to: Diplomat APM8512-1 – Fault #210592
    Washman
    Participant

    Re: Diplomat APM8512-1 – Fault

    Hi

    Its a control module fault , have changed a few under guarantee. Just change module and all will be well.

    Mike

    in reply to: Hotpoint RLA84 Dead #254169
    Washman
    Participant

    Re: Hotpoint RLA84 Dead

    Hi

    VC1 is wrong stat, its used on fridges with ice compartment you need a stat for a fridge that defrosts rear plate before fridge cuts back in. As Dales Electronic says a VT9 or VL9 depending on type of fridge

    Mike

    in reply to: britannia cooker #254194
    Washman
    Participant

    Re: britannia cooker

    HI

    Britannia Living Ltd.
    Britannia House,
    281 Bristol Avenue,
    Blackpool
    FY2 0JF
    enquiry@britannialiving.co.uk
    01253 471111
    01253 471136


    Mike

Viewing 15 posts - 466 through 480 (of 894 total)