[Washman]

Re: Electrolus Dishwasher ESL 624 IMWS Help

Hi

NO the “brown sugar ” is the water softener part of the system,
posibily the safety part of the water inlet valve has triggered stopping water from entering machine and needs to be drained. And the reason for this has to be found. There is a small tube at the back inside at bottom right of machine looking from rear that will need to be drained..

POWER OFF WHEN WORKING ON MACHINE AND PLUG OUT OF SOCKET

Mike

[Washman]

Re: Indesit W103 Washing Machine

Hi

You have to take the clamp right off the tub to be able to release the back half of tub

Mike

[Washman]

Re: Belling 643SS

Hi

Thanks

Mike 😆

[Washman]

Re: Belling 643SS

Hi P45

Do you have the part no for switch

Mike

[Washman]

Re: Belling 643SS

Hi

Has this got a selector switch in front of thermostat ? have not seen this oven yet problem is that the oven fan only works in defrost position ,when switched to heat only the element comeing on

Mike

[Washman]

Re: Powerpoint Washer Dryer

Hi

A model number would help

Also this is the dishwasher support forum

Mike

[Washman]

Re: Beko WMA 1715S

Hi

Page 10 of your user manual tells you all about it ie flashing prewash light means child lock is on, to release press second and fourth buttons together for 3 seconds to de activate

Mike

[Washman]

Re: homark 02-700400

Hi

Part number for what

Mike

[Washman]

Re: samsung j1253 washer

Hi

That was the wording from user manual

Mike

[Washman]

Re: samsung j1253 washer

Hi

From user manual
E4 Make sure the source water faucet is turned on.

Mike

[Washman]

Re: Beko WMB10W timer

Hi

Connections no 5031681795751 £56.60 Trade +vat and SRP £78.24

[Washman]

Re: Samsung B1415 JGW XEU

Hi

Plaset and Askol should fit

Mike

[Washman]

Re: Whirlpool AWM 6110/3 – ‘Nasty smell’

Hi

Dave and gegsy ‘:lol:’

Mike

[Washman]

Re: Whirlpool AWM 6110/3 – ‘Nasty smell’

Hi

What type of drain connection do you have stand pipe or spout on side of sink trap.

If sink trap hose it should rise to highest point under sink to stop back flow from drain and not piont down wards from spout. Also use best wash powder and regular maint wash at 90deg

Mike

[Washman]

Re: Siemens XL1200 Washing Machine Leak

Hi

Check your drain pipe behind machine, is it connected to a stand pipe or goes to a spout on the sink trap. if a stand pipe make sure there are no blockages and water is not coming back up the pipe and overflowing.

Mike

[Author]

Posts