Forum Replies Created
-
Posts
-
Re: Smeg retro fridge freezer-should I get it fixed?
Hi
You cant fit it your self because pipes have to be disconnected so you would need a refrigerant recovery unit and a chargeing station to refill with refrigerant.
This is an experts job.Mike
Re: Help for Hoover Aquamaster HNF6147
Hi
What type of drain connection have you got , does it go into a stand pipe or a spout from the sink trap. If it fits to the sink trap is the hose fitted so that it goes upwards from spout as high as posible under your work top. Also try turning tap off to machine if machine still fills its your drain connection thats the problem.
hope this helpsMike
Re: SMEG UK STX2 Problems
Hi
You piccy looks more like the mains filter,not the motor capacitor . Motor capacitor should have 3 wires which go direct to motor and is probably attached to the motor and 10uf
Mike
Re: Servis w/m door/interlock prob
Hi
Allways change door interlock and handle kit together . I find that cures the problem every time.
Mike
Re: Hotpoint 9559W – Bearings/Seals
Hi
If you are that confused over where they go then I think you should get an engineer out to fit the bearings.
Look under repairs@ on the left
Mike
Re: Installation of an Induction hob. Help required.
Hi
Make sure to check up on correct pans for use on an induction hob.
Ordinary pans will not work.Mike
Re: Your worst job.
Hi
Bosch washing machine that had been installed before stone floor and cabinets fitted to final position.Stone floor installed up to machine,all pipe work fitted behind cabinets to find shut off valves and drain had to get kitchen fitter to remove corner unit carousel and backs of units then cut out stone floor to get machine out so that I could repair a leaking hose.
Mike
Re: Delay Timer in Hotpoint WD640
Hi
The idea of the wash delay is that you set the time to start the wash then set drying time ,machine will then wash and then go straight into dry cycle . When you get up in the morning its all washed and dried . Which means the washing is done with cheap electricity as well.
Mike
Re: Bosch Dishwasher With No Instructions Need Help Please!
Hi
Go to http://www.bshappliancecare.com/bshspares.html Instructions are downloadable from here , you will need the E-nr number of you dishwasher
Hope this helps
Mike
Re: What has happened to my Zanussi repairer
Hi
The 0870 number is a call centre number , so they would probably have passed the call on to your local Zanussi agent anyway.
Mike
Re: MFI DIPLOMAT OVEN
Hi
Drop down glass doors on ovens are not really designed to be used as a shelf , so resting cold dishes on them when the oven is up to temperature can cause damage, which often them to shatter some time later .
Mike
