whitevanman

Forum Replies Created

Viewing 15 posts - 331 through 345 (of 346 total)
  • Author
    Posts
  • in reply to: matsui microwave m155tc #169678
    whitevanman
    Participant

    Re: matsui microwave m155tc

    You can get it as a sheet (2ft x 2ft mica) Then cut to size. fit all microwaves.

    in reply to: Tricity Sovereign 4638 #169194
    whitevanman
    Participant

    Re: Tricity Sovereign 4638

    You can bypass the timer to make oven work, but i would recomend an experienced local engineer find one on this forum.

    in reply to: Creda Cordialle fan oven stopped #169149
    whitevanman
    Participant

    Re: Creda Cordialle fan oven stopped

    check door switch ?

    in reply to: Rangemaster 110 #168976
    whitevanman
    Participant

    Re: Rangemaster 110

    for this model 6196 clasic df, shows item as 619 on rangemaster drawing part no P026810

    just a though may help ?

    in reply to: old Servis quartz 1300 sapphire 9635G washer dryer #169019
    whitevanman
    Participant

    Re: old Servis quartz 1300 sapphire 9635G washer dryer

    used to work for National Homecare ex Servis, let me know what motor is fitted used to be servis part no 9102050, May have one if required.

    in reply to: De Longhi DFS901SS #169053
    whitevanman
    Participant

    Re: De Longhi DFS901SS

    also fit a protection plate over selector sw, to stop heat from wok burner recommended by delonghi

    in reply to: BOSCH Dishwasher #168934
    whitevanman
    Participant

    Re: BOSCH Dishwasher

    Unplug power

    check pcb behind facia for dry joint on heater relay 1st , clean & re solder if burnt out

    in reply to: Crusader condenser Tumble Dryer spins no heat #168726
    whitevanman
    Participant

    Re: Crusader condenser Tumble Dryer spins no heat

    unplug first, remove metal bar across rear then remove heater cover you will find two stats on top of heater assy one with a green / or red? spot on and the other with none, remove wires from stats note colours from each check for continuety across these probably spoted stat oc.

    If indoubt contact a local enginner details on site, or dave conway or kwatt
    they will be able to advise on correct part nos and supplier of part.

    remember electric can kill

    in reply to: sharp microwave parts no;/prices/availabilty #166844
    whitevanman
    Participant

    Re: sharp microwave parts no;/prices/availabilty

    i used to work for these 10 years ago, wife still works for them very good relationship with manager, pm me if any probs getting parts.
    parts for uk market are shipped there then distibuted across uk

    in reply to: WARNING Creda stat, 47th1/230, faulty batch #167356
    whitevanman
    Participant

    Re: WARNING Creda stat, 47th1/230, faulty batch

    take its the green spot stat, must be merloni clearing there stats out.

    we’ve at bg been having major recall, faulty stats from them.

    in reply to: whirlpool ADG 7450 D/W #167454
    whitevanman
    Participant

    Re: whirlpool ADG 7450 D/W

    check float sw in base

    in reply to: Schreiber D/W #167371
    whitevanman
    Participant

    Re: Schreiber D/W

    if dw check cam, use sandpaper gently,then silicone grease round cam will cure prob !

    in reply to: Hoover AS130-001 #167532
    whitevanman
    Participant

    Re: Hoover AS130-001

    Have you changed the tub assembley ?

    in reply to: SIEMENS VARIO ELECTRONIC FRIDGE FREEZER #167515
    whitevanman
    Participant

    Re: SIEMENS VARIO ELECTRONIC FRIDGE FREEZER

    this may help

    http://www.ukwhitegoods.co.uk/modules.p … page&pid=6

    in reply to: Rangemaster 110 6106001110 fan oven element #166500
    whitevanman
    Participant

    Re: Rangemaster 110 6106001110 fan oven element

    Yes can they make the holes any smaller. Used a needle to fish wire through after reaming hole with drill.
    Thanks all

    the manufacturer has now made a larger holes on new models hope this helps for the future

Viewing 15 posts - 331 through 345 (of 346 total)