Forum Replies Created
-
Posts
-
Re: Smeg Slimline DW
just a thought
Re: hot fiil dw
I can only remember a parkinson cowan having a hot fill, allegidly hot water before the was wash bakes the food on the crocks, and can make it difficult for it to be removed during the wash or so i was told many moons ago.
Re: Seimens Intergrated FF
subs,
I seem to think theres a mod/kit available for the Ntc as its foamed in, and am almost positive this particular topic was discussed 2-3 years ago on ukwg
somthing on the lines of this
http://www.ukwhitegoods.co.uk/modules.php?name=Forums&file=viewtopic&t=27930&highlight=siemens+fridge+freezer+modRe: Vauxhall Combo 1700DI central locking side door.
vivaro sliding doors had this problem 04/05 reg vauxhall had a few mods for this fault but it never cured it imho.
Re: Massive Samsung Recall For Exploding Fridges!
Well I never
😯
http://www.ukwhitegoods.co.uk/modules.p … ht=#228443Re: indesit wa 155 still not sorted
check the motor plug last two are tacho use amp tags if havnt got spare
plug.It may look okay but check under the mtr plug cover.
Wvm
Re: SMEG DWF 44 SS.1 problem
kiza wrote: What I have noticed is that upper and middle spray arms were not spinning. The water was dripping and at the end of the wash cycle both arms were in the same position that I have put them in
Posted: Wed Jun 03, 2009 8:03 am
kiza wrote: IThe water does come from top and middle arms, so the pump should be fine. I have exploded diagram with parts list for the model. Could it be a problem with pressure switch or blocked feed pipe to it? Thanks!
confused tbh
Wvm
Re: SMEG DWF 44 SS.1 problem
Kiza
tbh looks like the circulation motor is Stuck – Check by listening to a Humming sound after its has filled with water
or there is blockage somewhere on the outlet side of wash pump.
if its not humming then its probably the motor an or the capacitor thats failing.
Hope this helps
Wvm
Re: Fridge explosion
It could be that the be that the pipe buried in the insulation had corroded causing the leak.
Take a look at this one
Re: Hotpoint WD420 tablet not dissolving
Many years ago, a problem occured with a batch of ariel tablets purchased locally from Tesco’s, your problem sound similar where I was getting complaints from customers saying the tablets were not desolving in the drawer.
The company which I worked for had a relationship with ariel, and when I rung them up at customers house, they admited there was a problem and gave them a free supply of tablets (dont know how long for) and paid them the cost of three months service contract.
Strange but True.
And before I get slated not by you, You say you have just moved and as Jim says your water presure may be low or it may have those dodgy self tapping water taps fited which may have cloged up or if the decent ones are fitted with rectangle blue and red levers they may be worn and not turning the water on properly. if fitted use a small screw driver to remove small screw and then removing red or blue lever and check if the brass double D has fully turned 90 degrees either way. take care if you use pliers to turn them if stiff cause had one snap on me once (ripleys beleive it or not).
Hope this helps.
WvmRe: Hotpoint Possible turmoil?
kwatt wrote:See the front page now, this story
Fascinating stuff is going on out there.
K.
Bloody hell, the world has gone mad, crossbreeding appliances next, the appliance market is doomed bo-indshit-selecta brand comming then.
😳 yes I would recomend one love its abit off everything, its got indesit pcb, hotpoint wma tub, and a bosch belt, are they taking the P*@s?
Thanks for the warning must go and get those pills from the doctors now.
Re: Grill Pan Handle
could try bosch
http://www.bshappliancecare.com/Bosch/contactform.html
0844 8928921Rgds
Wvm
