[WhiteVanMan1]

Re: Bosch WF02865GB. Spin probs.

I had this problem a couple of weeks back and it was a duff commutator.

[WhiteVanMan1]

Re: belling oven

Could be XOU 90

[WhiteVanMan1]

Re: Stoves 900EF main oven hinge probs.

I had a problem like this a couple of years back. From what I remember, there should be no play in the pivot pins. Even a small amout of play will make a difference. In any case the hinges came as a kit complete with all the pins etc. Don’t know if they’ve changed it so you have to buy them separately. Hope this is of help.
Steve

[WhiteVanMan1]

Re: Electrolux WM 1000A

Cheers Alan, Will check that one and let you know. Steve

[WhiteVanMan1]

Re: Neff S4431WOGB/07

Cheers Gegsy, Yes, done all that, no water in base, front hose clear, no cable harness damage which is rare on these machines. Just no supply, suspect timer fault but could use wiring diagram or it’s a strip down job to follow cables, YUK.
Steve

[WhiteVanMan1]

Re: Hotpoint DWF50 Sticking

Cheers Jim, Thanx for the reply, I’ll check it out.
Steve

[WhiteVanMan1]

Re: hotpoint wf340p

Just a quick note. The decision on D O P ‘s is left to the Hotpoint engineer that turns up. If your date code is in time, he will repair without further problem, UNLESS you get one that has some sort of problem and likes to make life awkward.
Steve

[WhiteVanMan1]

Re: Indesit DI61UK dishwasher

Thanks for your replies lads. I will check it out.
Steve

[WhiteVanMan1]

Re: old AEG tumble dryer belt

Yes, top and sides off as described by MS appliances, but also screws at base of front panel can be loosened to give just a bit more to squeeze the new belt in.
Steve

[WhiteVanMan1]

Re: hotpoint 7842 d/w

I’m with penguin 45 on this one. It is rare for this timer to cause problems, I’ve never come across it.

[WhiteVanMan1]

Re: creda 49801

Wiring diagram available for above for anyone who wants it.
stephenwhitehead@btinternet.com.
Cheers

[Author]

Posts