Forum Replies Created
-
Posts
-
Thank you for that Dave, it’s very much appreciated. I think in light of all the facts, I’m certain in my mind that the fault lies in the PCB. My problem now is that the only PCB’s I can find are all unconfigured. Looks like a I recommend a call to Hotpoint . Thank you for your help. Steve.
Cheers Dave. Motor is brushless and works fine. It seems to get to heat pause, then go into fault mode. At the moment she’s waiting until it goes into fault mode, then restarting on the rinse and spin programme to finish the wash, which it does without a problem. Steve.
Thank you for your reply Electrofix. Only light illuminated on the vertical bank is the door locked light. The four horizontal lights are flashing.
Cheers all for your assistance. I had checked for possible blockages. When I told the customer the pric of a pressure switch they decided to buy a new dishwasher
. Steve.:mad:Update 25-11-2019.
Checked out all possibilities and could find no reason for the continuous bleeping. The dryer was working ok apart from that. I turned the bleeper off and all seems ok. Not strictly satisfactory but time will tell. Thank you so much for your help. Steve.:mad:;)Many thanks Dave. The filters are clean and I cleaned the condenser base out when I was there. They are away until the 23rd so I will double check. Thank you for your assistance. Steve.
Cheers Dave. I know these machines detect pressure to the spray arms. Here’s hoping it’s just blocked 🙂
Sorry for the dela7y Dave, and thank you for the diagram. It’s just something I have noticed on other cookers of the same model. Steve.
