[a1al]

Re: LG WD(M)1239

I’ve come across this fault before and thanks to this forum it turned out to be that the drum bearings were badly worn causing drum to go out of line and shudder before bringing up this fault.

Hope this helps

[a1al]

Re: Bosch D/W SGV53E03GB/74 “Staining”

Thanks for that bzz67 I’ll Have to arrange another visit to take a look

Many thanks

[a1al]

Re: Zanussi Err

Had similar with different machines always asummed it was a bad connection on some of the low voltage connection plugs that you cure by removing and replacing

just a thought

al

[a1al]

Re: Bosch D/W SGV53E03GB/74 “Staining”

What does the diverter do and in what way does it go faulty

thanks for your reply bzz67

al

[a1al]

Re: Zanussi TDE4235W “Flashing at me”

Hi Geoff

Thanks for your reply already tested NTC and it seems to be find do you know what the leds flashing left to right means

Thanks again

Al

[a1al]

Re: hoover/candy int f/f fridge thermistor

Hi Chris very interested in the proper proceedure any chance you could email it to me

Thanks

Alymer

[a1al]

Re: LG WM-11220FD W/Machine ‘LE’

sorry about delay in replying new bearing done the trick

Thanks for your help Steven

[a1al]

Re: Whirlpool Oven Wrong Temperatures

where can I get a “sam module” and what does it do

[a1al]

Re: Ariston F/F MBA 3842C UK

Hi Guys, it was the diverter valve

Thanks for the help

Alymer

[a1al]

Re: Ariston F/F MBA 3842C UK

Bryan

This valve is it a “diverter Valve”? @ £24.00 + Vat It just I have been trying to source part before I take on repair.

Thanks

a1al

[a1al]

Re: Ariston F/F MBA 3842C UK

Thanks for your reply smartin

Can you tell me where exactly this valve is and its purpose, and can it be replaced without breaking into refrigeration pipework

a1al

[a1al]

Re: Hotpoint WMA 20 Door lock + PCB

Thanks jim that should sort it.

al

[a1al]

Re: Hotpoint WMA 20 Door lock + PCB

Thanks iadom that would be great if you could email me that diagram, unfortunatly the customer removed plug belonging to doorlock, do you think the diagram will show these connections so I can reconnect using spade type connectors?

Thanks again

al

[a1al]

Re: LG WM-11220FD W/Machine ‘LE’

Hi Steven
Thanks for the promt reply,

I’ll let you know how I get on

al

Lucky Goldstar

[a1al]

Re: Samsung F/F RS20CCSN

Sorry with late reply

But customer did not want it repaired at the time ( I think she wanted a second opinion ??) rang back recently for repair and the defrost senor seems to have done the trick

Thanks everyone

a1al

[Author]

Posts