Forum Replies Created
-
Posts
-
Re: Baumatic BWD121 price of parts
search on this site is a valuable tool, just stumbled on this gem and saved myself about £60 in spares 😆
now need to try and keep a straight face as i tell my cust the plastic door fraame for a baumatic is £101 😳
Re: Whirpool dishwasher door springs?
481240118707 x2
481240448746 x2metal bands and plastic wheels wheels 😉
usually just the r/h side is gone but i tend to change both
Re: Which mobile printer?
ive got one of the brother mobile ones, never really been happy as text needs to be very small to fit onto invoice,
if anyone has a samplle invoice they could send me to see which way its done best that would be great.#
if not brother mobile bluetooth printer for sale 😉 😆
Re: lg washer dryer test procedure
——————————————————————————–
LG test sequence some models two versionspress Rinse & Spin buttons then turn on.
all lights on display light, each time you press the start/pause button checks a feature,
1 press tumble clockwise 40-50 rpm (shown in display)
2 low speed spin 600-650 rpm (sid)
3 high speed spin uptp max (sid)
4 fill thru prewash water level (sid)
5 fill thru main wash (sid) or hot valve
6 fill thru hot valve (sid) or main wash
7 fill thru dryer if applicable anti clock tumble
8 tumble anti clock 40-50 rpm (sid) or heater
9 heater on for only 3 seca or drain
10 circ pump on or turn off
11 drain pump on
12 turns offcant test fill on cond compartment!
Re: hja8630 intigrated dw
from memory i think these are the beko made ones, lug at top right corner, a firm twist usually gets it without any damage.
common as muck to fail as well i carry 4 as van stock 😯
Re: Kuppersbusch igv659.4/03 Dishwasher
clean the crud in matrix, also check the pipe that goes between pump and matrix, platic push fit pipe, should just pull out
Re: Kuppersbusch igv659.4/03 Dishwasher
clean the crud in matrix, also check the pipe that goes between pump and matrix, platic push fit pipe, should just pull out
Re: hotpoint washers filling and draining as soon as prog st
probably ntc fault, check wires at ntc if not needs a pcb
Re: engineer bonus ??
im my last job before i started out myself i had a bonus system
basically the 1st £1000 i brought in from repairs didnt count, anything else after that i got 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}
so if i brought in £2000 in 1 week i got £100 bonus
always encouraged me to bust a gut and earn as much as possible.
Re: zanussi zwf12070w
pressure switch fault, it sometimes just needs the board reset, i think the fault sticks till you do a reset.
Re: Call Divert
bt give you the option to switch that message off, if you divert it goes straight to a ringing tone, if you divert when busy or unanswered it rings home phone then theres a pause and it rings mobile
HTH
Kevin.
Re: configuring zanussi zwf1427 module
according to tds you cant configure these, you need to buy the configured board.
it looks like you need some sort of hardware/software to configure them which only approved agents get??
