Forum Replies Created
-
Posts
-
Hotpoint WDL540 washer dryer
check wiring at door lock, motor and module(especially motor)
The clicking isnt a fault code it is the lock solenoid trying to engage.
Re: Hotpoint WT741 Stuck on 01 minute
Bernie wrote:Hotpoint WT741 Stuck on 01 minute
I have just changed the PCB on this machine now it fails to rinse and spin after a wash; instead it agitates endlessly on 01 minute until customer cancels.
Sent the PCB back to EMW who tested it and found no fault with it.
Have tested heater and motor for insulation both have infinite, I even changed the heater anyway still the same, is there any think else that I can try.Thanks for looking
Bernie
pressure switch or wiring at switch??Re: Beko intergrated washer dryer model No.BWD6421
iirc these are the same as the baumatic bwd, in which case f08= tacho fault on motor.
hth
kev
Re: Zanussi FX1465W Washing machine.Aborts from start.
check out the pressure switch, if there is 2 its usually the black small one it works using frequecy so dont blow through it but check connections and give it a gentle tap, if not try a new one.
Re: CURRYS KNOW HOW
Martin wrote:
A1engineer wrote:
looks like they have upped there salary hmmm??Ah but don’t forget that is for the Glasgow/Cumbernauld area. The rate that includes ‘giving blood money’.
oi im from glasgow 😯
Re: CURRYS KNOW HOW
looks like they have upped there salary hmmm??
Re: Diplomat ADP8342
i agree with keith it will be f11 which is optical water sensor in sump, usually just gunged up but can be faulty, also check wiring and flow meter.
Re: creda cooker
yeah top needs to come off but in there wisdom they put screws in behind the side panels lol
you can usually get away with just taking out back screws of sides and squeeze a driver in to undo the top screws, after that its pretty straight forward iirc
Re: lamona hja8704
might just need reset hold in start/cancel button for about 12 seconds, for some reason they take ages to reset.
LG dishwasher OE error code
Check the pressure tube isn’t split, especially around the pressure switch the right angle causes problems
Hotpoint LFT114
The wee top pcb boards can cause funny switching on when off and going dead etc faults, think they are about £25
