Forum Replies Created
-
Posts
-
gone a bit slow here again,
people worried about who’s running the country and how this is going to effect them finanicialy , or am i looking too much into things as ive got too much time on my hands ….Re: Waste Carriers Licence
Take today for example, replaced a 3 year old frigidaire rl6003b which had degassed itself. Technically, that could be refurbished by recharging it
i wouldnt bother..the leak will be at the water heat box and once it goes there..it is scrap.
Bryan
Re: Samsung SR-S2028CSS on the blink
Hi
your missing the defrost heater and evaperator cover to repair your appliance correctly.I can supply direct if you want me to or you can order through partmaster who dont know there arm from there elbow.
Bryan
Re: Kenwood KDW12ST3A – Error E3 – Pile of Poop
hi
thermal fuse blown..possibly caused by the main pump not pumping correctly or blocked spray arms..
Bryan
Re: Samsung SR-S2028CSS on the blink
Hi rage..
Sorry to say but if the part that you have ordered is that of the link you posted….that is NOT the defrost heater.
This will NOT cure the problem you have,If you read through the previous posts that jhave been made concerning the rs20 or rs21 then you will find the correct parts required.
Bryan
Re: Importing elements
Hi
unless you have a LOT of capital to outlay then its not going to be worth it..Dependant on which elements also as they will possibly need to make the set up for you at a cost of approx £10000 each one..ive already gone down that road and dropped it and found a better source closer and far more reliable in the quality.
give me a call sometime..07961365484
Bryan
Re: Samsung RS21WCNS Fridge freezer, Fridge not cold
defrost sensor,heater,thermal overload all in the fridge.
bryan
Re: postage or carrier
PARCEL2GO is best,post office is gonna cost about £8 same cost but trackable with carrier p2go
UPTO 25KG
bryan
Re: WTA Council Meeting May 2010
Ok with me but fraggle will confirm as i have no idea what when she has planned .
bryan
Re: Samsung RS21DGRS Assembly stuck
Hi
the cause is due to your selector arm being jammed in the wrong section of the box at the rear of the ice bucket. you will need to really pull hard and wobble the ice bucket to remove it and then make sure the steel bar goies into the plastic square centrally.
bryan
