admin

Forum Replies Created

Viewing 15 posts - 631 through 645 (of 12,518 total)
  • Author
    Posts
  • in reply to: north west based work #430171
    admin
    Keymaster

    Re: north west based work

    Hi

    He has an option to do a home based NVQ lvl2 If I remember to build the knowledge base as I have all the documents and test sheets that the trainers have and he can purchase the book to do it for about £25 and if he can show he has a knowledge base my local training centre has advised that they would look at allowing in and then carry out approx 2 weeks training and then exams that take another week. So in theory he could do it in approx 6 months at a reasonable cost if you look at the benefits. The problem is that a lot of engineers won’t take the time off for training as they say they will lose money.. The more knowledge you have the more work you will receive and over a period you gain the respect of the manufacturers and work providers.. ( me excepted..As some say i’m too blunt and to the point but I still get the work ).

    Bryan

    in reply to: north west based work #430169
    admin
    Keymaster

    Re: north west based work

    Hi

    get him to become gas safe registered and he’ll get plenty of work,A gas safe engineer will always be priority over a standard engineer on the tier basis.

    Bryan

    in reply to: north west based work #430165
    admin
    Keymaster

    Re: north west based work

    hi

    What are his skill sets and postcode ares he covers ?

    Bryan

    in reply to: HELP!! – Samsung RSA1WTMH American Fridge Freezer #430091
    admin
    Keymaster

    Re: HELP!! – Samsung RSA1WTMH American Fridge Freezer

    YES

    in reply to: HELP!! – Samsung RSA1WTMH American Fridge Freezer #430089
    admin
    Keymaster

    Re: HELP!! – Samsung RSA1WTMH American Fridge Freezer

    Hi

    Most likely cause on this model is either the defrost heater plug is not fully pushed in or that the heater is duff or thermal fuse or defrost sensor.

    Bryan

    in reply to: Payments – First4Service #430066
    admin
    Keymaster

    Re: Payments – First4Service

    Yes it does seem that the payments that where every 2 weeks have now stretched to over a month.

    Bryan

    in reply to: wanted… Pcb aeg f35080vi #429531
    admin
    Keymaster

    Re: wanted… Pcb aeg f35080vi

    well had a go at the switch but no joy, but I see what you mean
    about the switch ended up with a new pcb being fitted

    canufixit

    in reply to: Samsung Fridge Freezer Model RSH1DLMR #430003
    admin
    Keymaster

    Re: Samsung Fridge Freezer Model RSH1DLMR

    FOR A START !!!! STOP PLUGGING IT IN !!!!

    The trip goes for a reason and that is for your safety !!

    You will need an engineer as it could be the heater,compressor or board failure.

    Bryan

    in reply to: Baumatic BT3600ss #429961
    admin
    Keymaster

    Re: Baumatic BT3600ss

    Sorry

    Fan element 07026851

    Qualtex dont recognise it either and wouldn’t know what size ect until it came in and wouldn’t know about pattern ect.

    Bryan

    in reply to: Samsung WF80F5EZW4X/EU #429964
    admin
    Keymaster

    Re: Samsung WF80F5EZW4X/EU

    Hi

    Check for pump,pipe,plumbing blockages.

    Bryan

    in reply to: Baumatic BT3600ss #429959
    admin
    Keymaster

    Re: Baumatic BT3600ss

    HI TIM

    Part 7040919 we can get if you wish

    bryan

    in reply to: HELP! is my Samsung fridge freezer melting from the inside? #429855
    admin
    Keymaster

    Re: HELP! is my Samsung fridge freezer melting from the insi

    Hi

    What model is the unit ?? If the fridge is on top of the freezer then it looks like it maybe that the defrost heater that MAYBE behind the liner is shorting out.

    My recommendation would be turn the appliance off and unplug until it has been checked out.

    Bryan

    admin
    Keymaster

    Re: HELP! is my Samsung fridge freezer melting from the insi

    Hi

    A better picture would help and also where about is it ?

    Bryan

    in reply to: fridgidair freezer drawers? #429783
    admin
    Keymaster

    Re: fridgidair freezer drawers?

    Hi

    Model number would help greatly

    Bryan

    in reply to: MIELE T430 heater bank #429751
    admin
    Keymaster

    Re: MIELE T430 heater bank

    Hi

    Ive got a miele t/d heater on the shelf and will check the part number

    Bryan

Viewing 15 posts - 631 through 645 (of 12,518 total)