Forum Replies Created
-
Posts
-
Re: Philips fridge/freezer – worth replacing seal? or gluin
Hi,
Sorry if I’m being dense, but I couldn’t find any kitchen suitable silone glue (tried 2 DIY stores and got a blank look from both of them). I was therefore thinking – is this the same silicone sealant I’ve put behind my sink, to put a seal where it meets the wall, or is there a special type of silicone glue? And if so know where I could get it mailorder?
The closest I cam to a food-safe glue is copydex safe adhesive – apparently this is non-toxic, but I’m not sure how effective it’d be…it’s made by pritt-stick after all…
Cheers,
Jon
Re: Bosch not taking in enough water
Hi Martin,
Apologies for not replying yesterday we were away from the house.
I tried the link but no-one in my area.
Could you possibly provide a bit more detail on where to locate the hose from the meter tank and what I’d need to do to access it.
One other thing I noticed today is that when I remove the filter in the bottom of the machine there is still some water left there – is this normal ?
I’ll follow your advice to disconnect the machine from the mains before doing anything.
Thanks.
Re: Indesit D41 eroor code ?#?#
It seems that there was a leak, i unplugged it, ’tilted’ the machine and a reasonable amount of water came out. I think the ‘mrs’ hadnt scraped the plates too well,blocked the filter and it may of been unable to drain and overfilled.
All is well now.Thx for your advice.
Paul
Re: Oi!
And what would you like to talk about?
The weather, for instance…..wether we listen to gobshites or not!
Wether we respond or keep stum.
Perhaps the title of “Oi” should be redirected slightly, say Belshill.
Kevin
Re: Zanussi ZWD1680 Washer Dryer – Dilemma
Hi thanks for your replies !
I forgot to mention that when the machine is run on 1200 spin instead of 1600 it still vibrates like crazy.
Also, the machine is ona tiled floor.
We previously had an old Hoover purchsed in 96 and that was a good machine. Not very noisy, although it used to bang at the sides !!
Can anyone recommend a good brand/model to go for instead ??(WasherDryer)
Or will a different Zanussi be better.
Thanks
🙂Re: Service Engineers – London/Home Counties
I am very intrested in your vacancies for white goods engineers, I have been doing this job for many years mostly local electricity board (made redundant) hoover candy group, presently british gas . I live in farnham surrey and would be looking for work in this area, looking forward to your reply.
martin marsh
marsh323@tiscali.co.ukRe: Service Engineers – London/Home Counties
kwatt wrote:A national appliance manufacturer is seeking service engineers as per the following article, all information will be treated in the strictest confidence in response to this request.
Exciting Career Opportunities For Customer Focused Domestic Appliance Engineers (Exc. Refrigeration)
Currently, we have 3 vacancies for experienced white goods engineers (employed) in the London and Home counties region.
• Are you ready for a new career opportunity?
• Are you capable of becoming an active member of a progressive, forward thinking team?
If so, we can offer you:
• Competitive Salary (plus London Weighting where applicable)
• Bonus Scheme
• Overtime (where appropriate)
• Fully Expensed Vehicle
• Comprehensive Benefits Package (including company pension scheme)
• Comprehensive tool kit
• Uniform
• Full Induction Provided
For further details please email us here on info@ukwhitegoods.com
Thanks Penguin45
Had to take the bull by the horns and attack the side fill chamber. It was badly clogged. A good clean and a wash cycle later all seems to be well. Appart from the broken plastic lug that’s ment to hold the door catch in place. Any ideas of a glue that will cope with the 70+ temp, Araldite is only rated to 65 so I don’t expect it to lastRe: Philips fridge/freezer – worth replacing seal? or gluin
Thanks for that; will go and get it sorted out.
Jon
Re: margherita 2000 troubleshooting
I have the exact same problem! The additional problem I have is that I’ve lost the user manual and now haven’t a clue where the filter is(!) – there’s no obvious door that might open to reveal a filter. Can someone enlighten me before I rip the thing apart searching? Thanks 🙂
Hooray!!! We took Allders, who sold us the SMEG ovens, to court and were awarded the cost of the original ovens plus the cost of going to court. For all you people who have a problem with SMEG I would recommend getting in touch with the shop first and then the Trading Standards office who were very useful to us. Good luck.
Re: Indesit D41 Error Code
have had the same problem with our d41 and have just tipped the machine and emptied the try with success its is at this moment purring away nicely ,switch it on and give it chance to start by the way ,there might be a little gurggling as the water puches the air through good luck
