[admin]

Re: bought a new bosch 43C12 dishwasher not drying properly

hi BSH-MAN thanks for your reply, he wasnt actually carrying the laptop or toolbox as he had already brought them into the house and left them in the kitchen, he was walking out to the car to get the module, after he decided it needed one, he just walked thru the wrong non sliding side of the porch 😳 never mind no real harm done.

the non eco washes- well there s the quick 30, minute one, the economy one and 65degree one. to tell u the truth i havent run the 65 degree wash yet, i shall do so today and report back tonight or tomorrow what happens.
so this model has no fan? i understand that would explain why it makes no noise after 1 hour and 50 minutes and after a further 20 minutes the led goes from active to finished. so its doing nothing in this time? does this mean it is the same as leaving the 30minute quick wash for 20 minutes to dry without opening?

the rinse level- do u mean whether the rinse aid is going down? i cant really say but i would definately think it is as without rinse aid in the reservoir everything is really wet but with it it gives the picture in the post above, condensation at the back loads of wetnes on the racks but not really any wetness on the dishes. the underside of the cuttlery tray is really really wet with rinse aid but the cuttlery in it is dry.

maybe im a bit fussy but my last dishwasher dryed everything until recently that was the reason to change it, thanks and ill report back on the 65degree wash tomorrow. 🙂

[admin]

Re: ice forming on inside of fridge

Thanks K.

To replace the thermostat – is that a DIY job?

Neil

[admin]

Re: funkyboogy

Cheeky fucker…

After spouting off about how good his job is he wants tech help to solve a BG problem.

Wonder what you guys think?

Kevin

[admin]

Re: ariston dishwasher AFA 350

I take it this is private then, as you arn’t asking BG technical!

I am not solving BG tech problems for them

Kevin

[admin]

Re: Fagor Buy Brandt!

AIS can have Brandt, I’ll stay with D&G.

Kevin

[admin]

Re: Question For The DASA Bods

Fraid I don’t agree on bringing Dasa upto date with UKW, Walter will be there and anything said will go straight back to the twats paymasters.

I propose we edit what we say carefully, letting slip only what we want the WP’s to hear.

Kevin

[admin]

Re: Lofra

Tunnicliff brought the Lofra work to Jason where it was carved up to Dasa members, Council members looked after 1st though, this is the same Tunnicliffe who set Jason on the Indesit work, Jason also gave him Network Dasa list…for free.

Tunnicliff is not to be trusted, he only looks after himself.

Kevin

[admin]

Re: Noobs @ Whirlpool

I also hear he gave away details of the whirlpool network to Servicepower….hence all whirlpool agents have been approached by Brock.

Seems to me all whirlpool agents have recourse against whirlpool under the Data protection act, and that Whirlpool have let them all down under this act by not taking action against him.

The little shits remit has always been to collect work, his basic of £30,000 a year with a bonus of upto 10,000, 5000 for a car and expenses on top of that, he has to bring 1.5 millions worth of business to earn it.

Try swallowing hard the next time Wirlpool tell you theres no money in the coffers.

Kevin

[admin]

Re: Freezer/Refrigerator problem

K.
Thanks for your suggestion. I tested the freeer door seal by sliding a sheet of paper all around. The seal is tight. Anything else?
Michel

[admin]

I think it is sorted. My supply valves are the modern little ball types, but I seem to have very poor quality ones. The hot was not turning on and off correctly. Now replaced with better one from my scrap box. just done a number 5 with prewash, result OK. The numbering on the pressure switch was essentialy the same, once I realised that the common of each switch section had a second spade. On one switch, the number was duplicated, on the other it was marked “P”.
I would still like to get a sight of a service manual if anyone has one, it may actually fail one day. Thanks.

[admin]

Re: hotpoint wma66

hi all,

Ive just cleaned out the drain pipes (half full of scale and slime) and tested thermostat (22k ohms cold) and element (30 ohms). Found ocassional spike across element but otherwise 0 volts when washing.
One wire from element goes to pcb other wire goes to something with an air hose(pressure sensor?) could it be either of these?

Dave (Janes husband)

p.s. trains i can fix but washing machines…….

[admin]

Re: bought a new bosch 43C12 dishwasher not drying properly

had porch repaired today cost 220euro or 140 pounds not too bad really, will send bosch the bill lets hope they pay! as didnt hear anything from boss yesterday.

anyway havent run dishwasher, mayb he changed the module as it wasnt activating drying cycle?

can i ask does anyone know what this machine particular model does on the drying cycle, does it have a fan or does the element at the bottom dry them or how does it dry apart from the hot water final rinse, thanks

[admin]

Re: hotpoint wma66

Hi Penguin45,

I’m using hot and cold water fill and the temp seems fine.

thanks
Dave

[admin]

Re: candy cic60 wire came off of timer unit?

sorry forgot tosay my email is marjur6@aol.com
thanks again
ian

[admin]

Re: candy cic60 wire came off of timer unit?

Hi,
has anyone got a picture or a diagram for this machine they can send by email. i only need something with the timer plug wiring.
thanks
ian

[Author]

Posts