Forum Replies Created
-
Posts
-
Re: John Peel
eastlmark wrote:
I dont go back quite as far as Alex,
Mark.Nobody goes back as far as Alex, not even John P.
It was sad news and reminded me of the times I used to see JP at a Blues Club, called Mothers, in Birmingham where he was the DJ on Saturdays.
He would walk on to the side of the small stage where there were two record decks and place an LP on one of the turntables (for the youngsters amongst us an LP is a large thin disc that had grooves cut into it. When it was rotated and a neddle placed in the grooves you could hear music, static and scratches.) John would in his usual calm way anounce the title of the record and the name of some unknown artits and then walk back to the bar. When the first side of the record has played he would slowly walk from the bar, turn the record over and anounce ‘Side 2’ and walk back to the bar.
What a wondeful technique.
Happy memories – We will all miss him.
Richard
Re: Teba oven spares required
Richard has been supervising training courses for the last two days but I have now replied and washerdoctor has aknowledge my response.
Isn’t new technology wonderful.
Richard
Re: indeset we16 fault code F05
Sorted its fine now thanks all for helping me ,it was a silly fault in the end ……. Gaz
Re: Diplomat Oven Door Seal
Dave_Conway wrote: drop me an email and I’ll sort for you.
Incoming ! 😉
Cheers,
Johnkwatt wrote:4700, the model number you have is incomplete it will be AHY36**, you’re short two digits and we’d need that to track it down I think.
thanks for the swift reply, Kw
I’ve had a look at the MFI website, and as far as I can see the last 2 digits are the colour.
Mine’s Mocca so it would be AHY 3610.
If you don’t find anything under that number, try 3620 (White) and 3640 (Green) since they’re the same oven.TIA,
JohnRe: Ariston AWD1200 poor drying prformance
Good call! Took condensor off (not too difficult – for anyone with rubber arms!) and perforated metal plate was SOLID with lint, fair bit in condensor itself as well. Cleaned it all up, working through holes in drum to get to inside, and the dryer will once more get stuff hot enough to burn your hands.
What a rotten piece of design though – looks like something which should really have an annual clean, so why wasn’t it made more accessible?
Now all I need to do is get drum rotation sorted (it is doing the same on wash cycles – five or ten minutes of anti-clock rotation followed by nothing until power switch is cycled – motor control board?) and stop the dryer fan making an horrible din (probably fried bearings due to heat soak when air flow was down to practically zero).
Thnks for all your help – this goes a long way to convincing my wife that the internet is not just a sophisticated porn delivery sytem 😉
NHH
Re: ADP8342 – Flashing lights
I had this on my model. It was not a mechanical problem but an electronic one. The machine sometimes goes in to ‘test mode’. There is a way of resetting this. I am at the office at the moment so I have not got those instructions, but when I called Diplomat direct (as it was under the manufacturers warranty for the first year) they told me what to do over the phone to reset it. Diplomat may be more useful than MFI in this case. Their number should be in the manual
Re: bosch dishwasher SGS5312 – stuck on rinse mode
Hi Martin
You did say come back! The Bosch only ends the rinse cycle in quick wash. All other cycles finds it rinsing for over an hour. Reset puts it right but dry is never reached.
What are my options now?
Cheers
Dave A
Re: Tricity Sovereign Main Oven Hinges
have tricity sov cooker and get all spare parts from dalleys repair centre unit 3 sterling park claymore tamworth tel 01827289800
Re: Teba oven spares required
I think this oneis onefor richard as this model is’ntlisted on the teba disc but richard should be ableto help when ISDAL opens on monday morning.
bryan
Re: indeset we16 fault code F05
Penguin45,
I am not being funny but yer know thats just what I thought !
I was not aware that it was missing as I had no reason ever to look inside the filter housing before and did not no that it should be there as it had snapped clean from the bung ,But looking at the pump impeller it did not seem to be at all high tech! I shall replace the filter bung and see what happerns .place yer bets lads !!!!!! cheers GazRe: indeset we16 fault code F05
Thanks Martin,
but how do I check that the one I have is inop ?
Also would it make any difference if the pump filter is missing ,it is part of the bung with two legs and a donut type ring fitted to it ,this part or bits where gave to me today by my darling 🙁 ???????Re: indeset we16 fault code F05
Ok there are a few numbers I can find
Type number A13 LB 2000c
WE16 uk 080251620130 31040 305283774
on the drum there is 7400149301G 1600 C5 EVO 2
Are these numbers of any help ?
GazRe: Teba oven spares required
If you can supply the correctmodel number that will be on the outside of the top of the cover then the glass should be easily be obtained,you will have to pull the oven out of the unit by approx 12 inches to see the label though and will consist of normally 3 letters then 2 numbers followed by a GB number and then a 9 digit serial number.
we can then supply part number & cost ect
bryan
