[admin]

Re: Creda First Choice GDW50 – Thermostat Problem

Hi

thanks for the advice. I got it wrong with the main oven (missus gave me wrong details). The top oven looks like thermostat issue. The bottom oven
however does not fire up, just stays on low, maybe this is a FSD issue.

The cooker is only 4 years old, seems a bit soon for parts like this to fail

Anyway I will contact a Corgi engineer to sort it

Thanks again

Tony

[admin]

Re: Zanussi 1400 jetsytem washing machine – LED Code 3 ?

I think you may be reading the led wrongly? you say it reads 3 but this sounds like the same problem that I am having at the moment.
(see Zanussi skipping program)

I think the number 3 is not an error code but your machine is skipping all the program apart from the last 3 minutes when it drains and spins.

The 3 being the remaining time left.

might be wrong but thought I had to add my comment

Thanks

[admin]

Re: zanussi washing machine skipping program

Many thanks for the replies that have been posted so far, the front filter has been cleared with no difference but I have not managed to check the pipes.

The details on the label inside the front door are as follows:

Model No. FJS 1225W
Product No. 914512720/00
Type P6347639
Seriel No. 107 00150

IPX4

I dont know if this throws any more light on the problem but here’s hoping

Thanks again

[admin]

Re: Samsung Washer Error code 2

Thanks guys, this information helps me a lot.
Now I know where to look!!!

[admin]

Re: Samsung Washer Error code 2

Hi all,

A little correction to the problem stated in the first post. It’s not error code ‘ Eb’, but ‘E6’. Silly me, I was thinking the 6 was a b 😳

Does anyone have a list of error codes for the samsung aparatus. I presume there is some Samsung standard(?)

Bill

[admin]

Re: Hoover WDM130 Washer Dryer: Dryer Tripping

OK, the Wife can put the pegs away (for now at least!).

We were all right. No sooner had I submitted my last post than it tripped again.

Off with the top, off with the back and out with the screwdrivers. A bit of a fiddling and the condenser unit is in my hands. Well it was full (and the rubber hose). Just couldn’t believe it and was surprised that I’ve not had problems sooner. The ‘very fluffy blankets’ I mentioned were bright orange – don’t panic they’re only for my dogs beds – but what I cleaned out had very little orange in it (that was all pulled out of the pump filter previously) and looks like it’s been accumulating since purchased about 5 years ago.

All back together now and working a treat. Dare I say it, I’m pretty confident that all will be well 😀 . You’ll be hearing from me again if not!

Thanks again for all your help

Scrappy

PS Sound advice Dave about unplugging. Pretty obvious but it’s easy to get carried away when you’re on a mission and forget the obvious.

[admin]

Re: HELP! thermostat or flame safety device

I have the opposite problem it appears that the oven is full on or turned right down, so set it to gas mark 5 and it’s just full on. Could this be thermostat or FSD

[admin]

Re: Hoover WDM130 Washer Dryer: Dryer Tripping

Thanks all for your replies.

I reset the dryer trip again when I posted my query and the dryer has been used a couple of times without tripping – yet!

If it goes again, which I’m expecting it to do, I think my next step will be to have a look at the plastic condensor ducting on the back as suggested by Martin. As I said the pump filter was solid due to washing (and drying – which I forgot to mention) some blankets which were very fluffy.

I’ll let you know what I find. Thanks.

[admin]

Re: Diplomat ADP 8112 reset switch

😆

Found the reset button. It was indeed inside the machine under the element.

Thanks a lot for the help.

Jason

[admin]

Re: Zanussi 1400 jetsytem washing machine – LED Code 3 ?

The machine is only a few months old. Telephone your local Service Force engineer which can be found on the Zanussi website.

[admin]

Re: Homark Oven

Hi K,

Thank you for the information.

Should I order the fan through you or would these people order the fan for me etc?

Also is it difficult to fit the fan yourself?

I will mention where I got the numbers from.

Thank you for all your help,
Kind regads
Steph

[admin]

Re: zanussi washing machine skipping program

I always ask my customers to check that their drains are clear and that they have cleaned the filter out on the front of the machine before calling an engineer. Sometimes a blocked filter can cause unusual problems.

Failing that it does sound as if the PCB may have a problem and I would advise calling your local Service Force engineer which can be found on the Zanussi website. http://www.zanussi.co.uk

[admin]

Re: Servis M6135 user manual

Dave_Conway wrote:Dazza, the download link is only for product brochures, Servis UK choose not to make their user manuals available for download 🙁

As Martin says, you will need to phone them and order that way, which they will make a charge for.

Please let us know how you get on.

Regards

Dave.

Hi all just responding to your post to do with Servis Auto washer user manuals. i had the same trouble too but….

My reply from Servis

Thankyou for your email, Please could you contact our National Distributor GB Dars on Tel:-01942 601604, they may able to supply you with the Manual and relevant details of cost, p&p, etc.

I did and the cost starts from £10.29 inc p&p but my manual (Servis M6115) is out of stock with a 2 week wait.

I hope this helps you all.

celticace@dsl.pipex.com

[admin]

Re: Homark Oven

Hi Dave,

Thanks for the infomation, my postcode is BR3 5LE. If you could please send me a list of people in the area that would be great.

Many thanks
Steph

[admin]

Re: Homark cooker (model 02-722000)

Hi Dave,

I’ll go and have a look today.

Many thanks indeed for the help, Rich

[Author]

Posts