Forum Replies Created
-
AuthorPosts
-
admin
KeymasterRe: dishwasher problem
cheers lads,just rang mfi up,suprise suprise,not open until 10
admin
KeymasterRe: Who’s Minding the Shop (II)
eeerrr great……………
Im glad you know what the !!!! you’re on about
oh and thanks trevor for the support
and li for being such a nice host etc etc…………
ps….hope it works out fine for all involved!admin
KeymasterRe: ted becomes kheath
defo one of your best posts mate.
admin
KeymasterRe: Indesit W103 – Eight flash fault
Thanks in advance
Mikeadmin
KeymasterRe: Who’s Minding the Shop (II)
Whats one of them Martin?
admin
KeymasterRe: Dyson CR01 Washing machine
The rumour I heard was that a german manufacturer bought one and installed in their workshop…………..
Every time it failed under their tutonic testing they called out the service agent to watch what he did!
Can anyone confirm or expand….
kheath
admin
KeymasterRe: Who’s Minding the Shop (II)
We have access to a really nice cottage in Creetown in the DG postcodes but we were not there Martin, I will be there in August though, chilling to the quieter lifestyle of the scots………….
And as for looking into anything………….well its defo empty glasses whenever we meet as those two are alcho’s
kheath
admin
KeymasterRe: Who’s Minding the Shop (II)
and I was camping in the north somewhere……….
kheath
Avoiding oldtog on his honda 50 😆
admin
KeymasterRe: Rudolph Bows Out
cheers rudi,
I’d buy you a beer, at the next meeting if I knew who you were 😉ted
admin
KeymasterRe: The Customer is allways right!
Its amazing how going self employed makes you work Saturdays Albert
😯 😕 😈
admin
KeymasterRe: Smeg American Style Fridge Freezer Not Getting Cold
hi,
there will be another damper that restricts the incoming cold air from the freezer evap into the fridge.
Is the freezer functioning normally ie ice cream is not rock hard or it is remaining frost free or bread is easily defrosted, if these are true then the damper is the probable cause.
The slider Dave refers to controls returning air usually and when the damper does not shut correctly this can ice up, along with your veg freezing.Expect a £50.00 bill for a damper and labour on top of that and use a specalist fridge engineer who has experience with American models
ted
May 22, 2004 at 10:17 am in reply to: Zanussi Washing Machine & TumbleDryer stacking Question #111792admin
KeymasterRe: Zanussi Washing Machine & TumbleDryer stacking Quest
OK thanks for the advice.
Stella
admin
KeymasterRe: VT9’s
hi cd,
I tend to use the w4 from whirlpool as it fits their plug in type of application and of course is the atea equivlent of the k59 from ranco. The price though is really good……………..so i would take 30 from you if you do bulk buy…….
let me know what and when etc..
ted
admin
KeymasterRe: Liebherr refrigerator not cold enough!
Hello!
From what I’ve read this points to the condenser of your fridge not being able to function correctly. The condenser dissipates heat from the refrigerant gas, the heat being generated by the compression of the gas from the compressor.
The ambient temperature of the room will be seriously affected by sunlight through a window – the glass actually will amplify the temperature of the sun’s light passing through it. Most fridges in the UK have a maximum ambient working temperature of around 70 degrees and if your kitchen exceeds this the efficiency of the condenser to cool the compressed refrigerant will be impaired. For the refrigerant to work it must arrive at the evaporator at, not only the right temperature, but the right pressure (Boyles Law). Therefore the position of your fridge is probably the cause of its inefficiency.
As an earlier poster suggested, move it to a cooler location and see if it responds. However some refrigerant gases (R134a) do not like excess ambient temperature and contaminate the refrigerant gas with excess oil vapour and it may already be too late.
Ted
admin
KeymasterRe: New Director
Good point Dave……..
I conceed I should give a shit, so I will on my next visit to the white telephone, a hot one direct to the trubshaws of this world.ted
-
AuthorPosts
