Alanj

Forum Replies Created

Viewing 15 posts - 646 through 660 (of 757 total)
1 2 3 … 43 44 45 … 49 50 51
  • Author
    Posts
  • January 23, 2007 at 9:34 pm in reply to: whirlpool timer fault #202000
    Alanj
    Participant

    Re: whirlpool timer fault

    Hi jk,

    is the adaptor between the timer knob and timer spindle ok.The adaptor locates into the timer knob to select program.If it’s broken it might not be selecting the correct program.You will have to remove consul front to check.

    Alan

    January 22, 2007 at 3:04 pm in reply to: Bosch/Siemens carbons #200882
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Hi Guys,

    I managed to find what I was looking for eventually 😀 . Connect stock them as CBN9121 @ £2.99/pr. Thanks for your efforts :scot: .

    Alan

    January 22, 2007 at 12:13 pm in reply to: Hotpoint 9525W timer no rinse fill #201743
    Alanj
    Participant

    Re: Hotpoint 9525W timer no rinse fill

    Simon,

    you’ll find the number on the body of the timer.

    Alan

    January 22, 2007 at 12:10 pm in reply to: LG GR232SBFH #201422
    Alanj
    Participant

    Re: LG GR232SBFH

    Hi Guys,

    wrong info on this one. Freezer working ok, fridge not cooling.This appliance is less than a month old and the evaporator is solid with ice build up, hence why the fridge is not cooling. Is there any particular place to start looking to cure this problem? Any help grateful.

    Alan

    January 19, 2007 at 7:46 pm in reply to: LG GR232SBFH #201421
    Alanj
    Participant

    Re: LG GR232SBFH

    Hi Guys,

    thanks for the replies.Will let you know how it goes.

    Alan

    January 19, 2007 at 7:45 pm in reply to: Electrolux ER7926/1B Prod No. 925888655-01 #201430
    Alanj
    Participant

    Re: Electrolux ER7926/1B Prod No. 925888655-01

    Hi fairdeal,

    I have told customer to defrost the freezer and let me know if she has any more problems with it. Just thought I’d check with you guys for future.

    Thanks
    Alan

    January 17, 2007 at 11:17 pm in reply to: Hotpoint wmm 65a 1600 ultima #201236
    Alanj
    Participant

    Re: Hotpoint wmm 65a 1600 ultama

    Hi Flash,

    have you checked for the usual chaffed wiring underneath near front at balance weight, or broken wires inside insulation at motor plug?

    Alan

    January 17, 2007 at 11:11 pm in reply to: Rangemaster Classic 110 Cream/Brass #201155
    Alanj
    Participant

    Re: Rangemaster Classic 110 Cream/Brass

    Thanks for the info lads.

    Alan

    January 16, 2007 at 2:51 pm in reply to: AEG L16810 W/D Help #196815
    Alanj
    Participant

    Re: AEG L16810 W/D Help

    Hi Guys,

    had one recently throwing up variety of faults.
    Turned out to be earth fault at motor.Worth a try.

    Alan

    January 16, 2007 at 11:14 am in reply to: hotpoint tdc30 #201014
    Alanj
    Participant

    Re: hotpoint tdc30

    Hi Simon,

    common fault on these machines. Relay behind consul panel easily enough fitted Part no. HPT1701624.

    Alan

    January 15, 2007 at 7:13 pm in reply to: Bosch/Siemens carbons #200879
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Greg

    I’ve e-mailed pic.

    Alan

    January 15, 2007 at 7:09 pm in reply to: Bosch/Siemens carbons #200878
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Hi Greg,

    not for end cap motors just the carbons with the tag and spring.
    Don’t have a model number for fitting, it was for stock.

    Alan

    I would have uploaded a pic but have not mastered this task.

    January 15, 2007 at 5:30 pm in reply to: Indesit AIB16UK #200836
    Alanj
    Participant

    Re: Indesit AIB16UK

    Hi Johnnyj,

    thought it might be.EMW job then!

    Thanks
    Alan

    January 11, 2007 at 10:46 pm in reply to: BEKO D/W – D3731 fs #200354
    Alanj
    Participant

    Re: BEKO D/W – D3731 fs

    Hi Brett,

    I had a Zanussi d/w before xmas doing this and turned out to be wall socket was faulty.Is the on/off switch ok.

    Alan

    January 11, 2007 at 8:56 am in reply to: Boiling Zanussi #200165
    Alanj
    Participant

    Re: Boiling Zanussi

    OOPS! seems they have been!

    Alan

  • Author
    Posts
Viewing 15 posts - 646 through 660 (of 757 total)
1 2 3 … 43 44 45 … 49 50 51