allan73

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 497 total)
1 2 3 … 7 8 9 … 32 33 34
  • Author
    Posts
  • January 16, 2013 at 3:31 pm in reply to: Bosh SGS56E02GB/47 pcb module badly burned and no heat #388032
    allan73
    Participant

    Re: Bosh SGS56E02GB/47 pcb module badly burned and no heat

    Thanks Martin.It’s just that I remember reading something about a problem with some Bosh dishwasher modules and I wanted to check its not one of those.

    Allan.

    December 31, 2012 at 9:58 am in reply to: Bosh SHV55m03GB/79 dead m/c #386897
    allan73
    Participant

    Re: Bosh SHV55m03GB/79 dead m/c

    Thanks Martin, I’ll try to get one through Qualtex. Seems odd that Connect don’t supply the instruction sheet is it not a genuine part ?

    Allan

    December 29, 2012 at 11:01 am in reply to: Bosh SHV55m03GB/79 dead m/c #386895
    allan73
    Participant

    Re: Bosh SHV55m03GB/79 dead m/c

    Thanks Paul I’ll ask if they leave it switched on.Do you know if the pcb is plug in and play or will it require any configuration ?
    Allan

    December 29, 2012 at 10:15 am in reply to: John Lewis JLTDC10 #386855
    allan73
    Participant

    Re: John Lewis JLTDC10

    Thanks Captain, I’ll bear in mind what you say about the cap but as she complained about the dryer being noisy first I’m thinking the motor may well have gone west.
    Allan

    December 20, 2012 at 8:53 pm in reply to: Bosh WAE24363gb/05 reset procedure #386649
    allan73
    Participant

    Re: Bosh WAE24363gb/05 reset procedure

    Thanks Martin

    August 10, 2012 at 7:11 am in reply to: wdl 520 #378540
    allan73
    Participant

    Re: wdl 520

    Have you resolved this one Danny ? I have the same symptoms but seemingly when filling in the rinses.
    Allan.

    August 9, 2012 at 2:36 pm in reply to: Electrolux ELS4114 dishwasher leak from door #378658
    allan73
    Participant

    Re: Electrolux ELS4114 dishwasher leak from door

    Thanks captaincaveman1 bottom spray arm was indeed split 8)
    Allan.

    August 6, 2012 at 10:42 am in reply to: Neff u1422NOGB/03 oven knob loose #377849
    allan73
    Participant

    Re: Neff u1422NOGB/03 oven knob loose

    Ordered a guide for this oven but unfortunately to no avail. I now think the part required is the plastic support that clips onto the guide. It also looks like this comes with the facia at quite a price 😯 . This part seems to sandwich between the two plys of the facia panel, if that makes sense ?
    Could anyone confirm this is the case please ?

    Allan.

    July 29, 2012 at 8:06 am in reply to: Electrolux ELS4114 dishwasher leak from door #378657
    allan73
    Participant

    Re: Electrolux ELS4114 dishwasher leak from door

    Thanks I’ll check it.
    Allan

    July 9, 2012 at 9:08 am in reply to: Neff u1422NOGB/03 oven knob loose #377848
    allan73
    Participant

    Re: Neff u1422NOGB/03 oven knob loose

    Thanks A1 I thought that would be the culprit.Would you be kind enough to let me know if it should clip to the two metal lugs behind the facia ?

    Allan.

    June 21, 2012 at 9:09 am in reply to: Indesit WIA 121UK module #376809
    allan73
    Participant

    Re: Indesit WIA 121UK module

    I will need to check if the old eeprom is surface mounted or a plug in type Allsorts. It’s in a holiday cottage and I’m having difficulty getting access at the moment. The m/c’s hardly been used, most people staying there take the washing home with them.
    Thanks for the input.
    Allan.

    June 19, 2012 at 6:21 pm in reply to: Indesit WIA 121UK module #376807
    allan73
    Participant

    Re: Indesit WIA 121UK module

    Thanks Bob.
    Allan.

    June 19, 2012 at 12:56 pm in reply to: Indesit WIA 121UK module #376805
    allan73
    Participant

    Re: Indesit WIA 121UK module

    Might just do that Martin 😉 but out of interest, I’m assuming that a smart card is not required to programme these should I get an eeprom from Qualtex ?

    June 19, 2012 at 11:52 am in reply to: Indesit WIA 121UK module #376803
    allan73
    Participant

    Re: Indesit WIA 121UK module

    Sorry, should have searched :rolls: apparently it does require a plug in eeprom.
    Allan.

    June 19, 2012 at 9:04 am in reply to: Indesit WIA 121UK module #376802
    allan73
    Participant

    Re: Indesit WIA 121UK module

    Sorry should have said, the pt no for the module I’ve ordered is : C00143067.

    Allan.

  • Author
    Posts
Viewing 15 posts - 106 through 120 (of 497 total)
1 2 3 … 7 8 9 … 32 33 34