AMS

Forum Replies Created

Viewing 15 posts - 346 through 360 (of 463 total)
  • Author
    Posts
  • in reply to: Zanussi facia #185004
    AMS
    Participant

    Re: Zanussi facia

    £67.70 SSP from Connect but how realistic that is is anyone’s guess. In stock at £40.48 + vat trade.

    Dave

    in reply to: Smeg SUK62 MFWH…should I send it back now?? #184125
    AMS
    Participant

    Re: Smeg SUK62 MFWH…should I send it back now??

    Just to clear up a few ambiguities:

    “A thermocouple is a device made of two different metals which creates a small electrical charge when heated at one end by the flame. This small charge causes an electromagnet inside the gas valve to open and allow gas to flow to the burner. “


    Dave

    in reply to: Servis M9150 #183142
    AMS
    Participant

    Re: Servis M9150

    Thanks Kirk, I’ll bear that in mind.

    in reply to: Servis M9150 #183140
    AMS
    Participant

    Re: Servis M9150

    Thanks Dave 😀

    in reply to: Special tool of yesteryear #181146
    AMS
    Participant

    Re: Special tool of yesteryear

    Is it Excalibur? I prostrate myself at your feet, my Liege.

    in reply to: Who makes Prima washing machines? #180732
    AMS
    Participant

    Re: Who makes Prima washing machines?

    Had to install a new w/m and d/w for a customer recently, supplied by themselves. Both Prima. The w/m was a Zanussi and the d/w was a Whirlpool. ❓ ❓ ❓

    Dave

    in reply to: Beko WMB10W timer #180332
    AMS
    Participant

    Re: Beko WMB10W timer

    Thanks for the replies guys. Hmmmm, now which one shall I choose….

    in reply to: Beko WMB10W timer #180329
    AMS
    Participant

    Re: Beko WMB10W timer

    Correction : WMB10W 😳

    in reply to: email address #179192
    AMS
    Participant

    Re: email address

    jhopwood@iseappliances.co.uk

    in reply to: Bissell 3750 #179113
    AMS
    Participant

    Re: Bissell 3750

    Thanks Dave. A bit annoying that I couldn’t find it myself on there!

    in reply to: CREDA T620CW #178465
    AMS
    Participant

    Re: CREDA T620CW

    It could well be the timer, especially if it’s a Copreci as they’re cr*p. The new one is an Eaton and comes with a conversion kit and instructions.

    Hope this helps,

    Dave

    in reply to: BOSCH WTA 2000 DRYER #177828
    AMS
    Participant

    Re: BOSCH WTA 2000 DRYER

    As Chris says, the tripod/spider is not available as a spare part in it’s own right – although it should be! I’ve successfully drilled them off of old drums in the past and attached them with countersunk M6 bolts and nuts. I did e-mail Crosslea to se if they would supply me with some, but they said no – bless ’em! Perhaps the buying power of UKW could have more success.

    Dave

    in reply to: Finale 2006 Paris #176664
    AMS
    Participant

    Re: Finale 2006 Paris

    pardon?

    in reply to: LG WM 1280FHD BEARINGS NOISEY #175705
    AMS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Thanks very much Alro. Sounds pretty straightforward.

    Dave

    in reply to: LG WM 1280FHD BEARINGS NOISEY #175703
    AMS
    Participant

    Re: LG WM 1280FHD BEARINGS NOISEY

    Thanks Farmboy. 🙂

Viewing 15 posts - 346 through 360 (of 463 total)