[Ashby]

Re: Creda oven Mod 48902 Ser no. 25100091

Thanks Pip and Pgs. the cooling fan at the top is working fine.
As for the stat it’s a genuine one. As far as i know? it came in a box with a hotpoint label on it?
I’ll try a safety stat and see if that does the trick.
Thanks for your help.
much appreciated.
Ashby 😆

[Ashby]

Re: Creda oven Mod 48902 Ser no. 25100091

Hi Mark, thanks for your reply. whereabouts is the safety cut out stat situated?
Thanks.
Ashby. 🙁

[Ashby]

Re: Creda oven Mod 48902 Ser no. 25100091

Hi, Still having problems with this oven. I’ve changed the thermostat, fitted a new element and door seal. The oven doesn’t seem to be getting hot enough. Anyone else come across this?
Thanks.
Ashby. 😥

[Ashby]

Re: Creda washing machine Mod W100FW

Hi, Thanks PGS and Roy1, The customer rang today and said she’s been and bought a new machine.
Thanks.
Ashby

[Ashby]

Re: Creda washing machine Mod W100FW

Thanks Jim, I did check the tacho with multimeter, that was ok. I didn’t take it apart though. I’ll do that monday.
Much appreciated.
Ashby (it is FHP motor)

[Ashby]

Re: Creda washing machine Mod W100FW

Hi, I’m still having problems with this machine. after filling for a rinse instead of going into a distribute it does a very fast spin knocking the machine around the floor. it does this a couple of times then stops. I’ve had the board checked. That’s ok. checked for loose wiring, the motor is ok too. I’m Baffled. Anyone else had the same problem?
Thanks
Ashby. 😥

[Ashby]

Re: Creda washing machine Mod W100FW

Thanks Bryan, but the machine has never done this before. After it has filled for the rinse, it surges into spin and throws the machine across the floor.Strange?
Ashby.

[Ashby]

Re: Creda washing machine Mod W100FW

Hi Chaps, Thanks for your help. sorted that one. It was the economy button. However, it’s now on the rinse cycle and surges into a spin rather than a tumble.I’ve checked motor plug for loose connections and where it goes to the board. That all seems ok. Haven’t checked brushes yet. any other ideas? most gratefull. Thanks.
Ashby

[Ashby]

Re: cooker lamp

Hi Paul, Have you checked wiring for continuity? Maybe a broken wire?
Hope this maybe of some help.
Ashby

[Ashby]

Re: Creda oven Mod 48902 Ser no. 25100091

Hi Dopper, thanks for your reply. I’ll have to ask her about that one.
Like a lot of other customers, they all say; “Well it never did that before you changed the???”
Thanks
Ashby.

[Ashby]

Re: hotpoint washing machine mod wma34

thanks Chris, It’s the tacho. Are these available? or new motor?
Ashby

[Ashby]

Re: Samsung frige/freezer Mod FR-S2028CSS S/N 741942BT700042

Thanks Bryan. I sent you a text and pm over the weekend. thought you were perhaps away. would you give me a call please. Much appreciated.
Ashby 07821260757

[Ashby]

Re: Samsung frige/freezer Mod FR-S2028CSS S/N 741942BT700042

Hi, Customer said today the frige/freezer is working again it maybe ok for a while then go dead again? anyone got any ideas? thanks.
Ashby

[Ashby]

Re: Samsung frige/freezer Mod FR-S2028CSS S/N 741942BT700042

Hi, I’ve given the wrong model number for this F/F it’s SRS2028CSS. Sorry. Thanks.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Hi All, Does anyone know the part number for a Tank to fit this machine please. DWF 33P/17, 1020 4290 22618 947 0065. and price. The stainless steal tank i’m refering to not the metering tank. or a second hand one? Thanks
Ashby

[Author]

Posts