[Ashby]

Re: Ariston Washing Machine Mod. A1635 (Margherita)

Thanks Dave, I have an account with connect i’ll try them. I just assumed that they would say the same.
Ashby

[Ashby]

Re: Ariston Washing Machine Mod. A1635 (Margherita)

Hi Martin,Baron.
Thanks for your reply.I’ve checked pully,counterweight they look ok. The shock absorbers could do with changing though. I’ve tryed washvac and Masterpart both say they’re speacial orders 10 days plus. Do you know of anywhere i could get them quicker? Masterpart have given me a part number C00086515?
Thanks for all your help.
Much appreciated.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Hi Chaps, thank you all for your suggestions. There is no clamp inside the machine and there isn’t a large jubilee clip around the seal either. It’s leaking between the seal and the sump at the back of the machine. I can see whereabouts it is by removing the inlet valve. The tank itself is ok.
Thanks again.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Hi Chris, me again. just dug out a parts diagram. I notice there is a clamp around the top of the seal inside the tank? there wasn’t one inside this machine.Should there be? (Part No 483056)
Thanks.Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Thanks Chris.
Much appreciated.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Thanks, Jim, Chris and Martin. From what i could see it looked as though the water was coming through between the seal and the sump? When i removed the tank the the white and green wires attached to the red float microswitch came off. there’s 3 terminals on the switch. I’m sure it was only the white one attached to the top terminal. Is that correct?
Thanks chaps.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Hi Jim, I’ve found that this machine is leaking from the sump seal. I’ve taken it apart but the seal looks ok. After cleaning the seal and putting it back together it still leaks. Any idea of the seal part number please?
Many Thanks.
Ashby

[Ashby]

Re: Hotpoint Dishwasher Mod DWF 33

Hi Jim, Thanks for your reply.I’m not sure where it’s leaking from but i could see it the water dripping from the sump somewhere. The customer was watching everything i was doing. I’ll have another look next week. thanks for your help.
Ashby 😆

[Ashby]

Re: Zanussi DE6855

Hi, Had one like this myself a while ago. Can’t remember the model number though. It turned out to be a dry joint on the heater relay. I resolderd it and it worked fine. Hope this is of some help to you.
Good luck.
Ashby.

[Ashby]

Re: Candy CPDA 240 K Fridge Freezer

Hi, Sounds like thermostat. Switch off and remove plug first before you change it.
Ashby.

[Ashby]

Re: Refrigeration repairs your advice please!!!!!

Hi, I’ve just done a 4 day course at Ellis Training, Cuffley, Herts.
Tel. 01707 879879. Had an enjoyable time and learnt alot.
Ashby

[Ashby]

Re: Refrigeration Training

Hi Welsh boy, Thanks for your reply. (almost a month ago) Just been on a 4 day course at Ellis Training in Cuffley, Herts. ” Purely Practical Refrigeration” A very good course. I’ve learnt alot and now have the C & G certificate.
Many Thanks.
Ashby

[Ashby]

Re: Zanussi washing machine Mod FJ1454W

Hi, Thanks Rocker. Thanks Wilf.
I’ve already phoned Tony at EMW he didn’t know much about these. they don’t repair the boards for this machine.
Will check heater and thermister.
Thanks for your help chaps. much appreciated.
Ashby

[Ashby]

Re: Zanussi washing machine Mod FJ1454W

Hi, I’m still having problems with this machine. I’ve checked the tacho that appears to be ok. anyone had the same prob? Thanks.
Ashby 😥

[Ashby]

Re: Zanussi washing machine Mod FJ1454W

Hi Martin, Thanks for your help I’ll have a look on friday.
Anyone else have anymore ideas before i go?
Many thanks. Ashby

[Author]

Posts