bigchrisoioi

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 157 total)
  • Author
    Posts
  • in reply to: Zanussi Washing Machine ZWF1621 #318057
    bigchrisoioi
    Participant

    Re: Zanussi Washing Machine ZWF1621

    u need the fault code…..these machines are superb on diagnostics….give us the code if u can

    in reply to: Zanussi Washing Machine ZWF1621 #318055
    bigchrisoioi
    Participant

    Re: Zanussi Washing Machine ZWF1621

    sounds like a loose motor tacho magnet to me……..the diagonstics on these models are good, i would read the fault code!

    in reply to: aeg d/w #317875
    bigchrisoioi
    Participant

    Re: aeg d/w

    check for split lower spray arm….they dont rotate and spray into door..had it a few times with AEG slimline dishwashers!

    in reply to: zanussi dishwasher leak #317441
    bigchrisoioi
    Participant

    Re: zanussi dishwasher leak

    distripart did change the side chambers, they come with an extra pipe with no instructions….could u photograph it and post it…i think he has got a pipe wrong, the second one from the left should be left alone!….it cuaght me the first time i changed one!

    in reply to: zanussi dishwasher leak #317439
    bigchrisoioi
    Participant

    Re: zanussi dishwasher leak

    hi m8, when u say a matrix has been fitted what is the part number????…..some of these have a conversion that is not indicated in the part packing….do u mean the side tank ?

    in reply to: ESL6115 #317666
    bigchrisoioi
    Participant

    Re: ESL6115

    you can check heater resistance accross A1 and C5 on the PCB ..should be about 25ohms ish…..this checks the complete heater circuit…..takes only 3-4 mins without draaging machine out…if you have the circuit, change the PCB,,,,,

    A1 is the big relay terminal and C5 is the next small cable block to the left….i go accross all the terminals until i find the circuit as C5 is not always marked

    MAKE SURE A1 IS NOT DISTORTED , BURNT OR BULGING…IF IT IS YOU NEED TO REPLACE CONNECTOR!!

    hope it helps, Chris

    in reply to: indesit WIA111(uk) cannot reset program? #317625
    bigchrisoioi
    Participant

    Re: indesit WIA111(uk) cannot reset program?

    nice one..thanks for all your help guys

    in reply to: indesit WIA111(uk) cannot reset program? #317623
    bigchrisoioi
    Participant

    Re: indesit WIA111(uk) cannot reset program?

    sorry for my ignorance ..what is EMW…?

    in reply to: indesit WIA111(uk) cannot reset program? #317619
    bigchrisoioi
    Participant

    Re: indesit WIA111(uk) cannot reset program?

    cheers m8……do you know if they are avaliable configured , or do i need the dreaded software only avaliable to indesit engineers?

    in reply to: aeg oven #317548
    bigchrisoioi
    Participant

    Re: aeg oven

    coolling fan will stay on until cabinet cools down…how long does it stay on…if it never goes off check fan initation toc which is in the top cover ( its blue with 4 wires…if it is faulty it goes black!)

    good luck

    in reply to: Zannussi FLA with double terminal block on heater…. #317326
    bigchrisoioi
    Participant

    Re: Zannussi FLA with double terminal block on heater….

    not being mr know it all….but make sure u r fitting the right heater to these machines, a lit of the lux machines have double thermal fuses, if u fit the incorrect spec, the result could be a melted tub or fire…i know u all know this but just doting the ‘i’s and ‘t’s!!!!

    in reply to: zanussi dishwasher leak #317437
    bigchrisoioi
    Participant

    Re: zanussi dishwasher leak

    ahh..they do suffer from leaks from the side chamber/salt regen tank when they are blocked with food….they dump water through an emergency tube into the base….u cant clean them for an effective repair..the only option is replacement of tank….

    in reply to: De Dietrich un2587 America style fridge freezer #317570
    bigchrisoioi
    Participant

    Re: De Dietrich un2587 America style fridge freezer

    dont they use light tubes to defrost???……about £70 each if i remember

    in reply to: BEKO WMA 520S #317475
    bigchrisoioi
    Participant

    take it outside and burn it!!!, claim on the insurance !! lol

    in reply to: zanussi dishwasher leak #317434
    bigchrisoioi
    Participant

    Re: zanussi dishwasher leak

    check for loose salt container nut

Viewing 15 posts - 106 through 120 (of 157 total)