Forum Replies Created
-
Posts
-
Re: Hotpoint WMD960a
hi PGS
pm me your email address and i will send you some info.
Bob.
ps email sent 😉Re: Beko AP930X “F9” Error
Hi Tee
E9 (Ice machine failure):
– Entry: If switch does not change as described during initialisation or, while rotating ice machine, if SW position does not change in 1 minute
– Behaviour during error: Ice machine should not operate.
– Exit: If ice-off is selected, or if during initialisation switch changes as described.F9 is not listed
Hope that helps.
Bob.
Re: Indesit H20
just as it says on the tin. 😆
bob.
water fill problem,
the machine is telling you it needs H2O.Re: Hotpoint RFA60
good luck Steve.
if any one wants compressor guides please email me or pm me.
Bob.
Re: Hotpoint RFA60
hi mr Burns
there are six differant makes of compressor fitted to this appliance, it out of the housing first i think.
i will email you some info.
Bob.do you want me to send it to your works email if not pm me the differant email.
ps email sent.
Re: Zanussi ZWX 1605W
did you insulation test the heater as this is a classic fault on thia appliance.
Bob.
Re: Belling Cooker 492SS
Hi Malt
it might help you id your appliance if not its still a handy site to have
Bob.
Re: De Deitrich oven DOD448BG11
Hi jd
pm me your email address
and i will see what i can find 😉Bob.
Re: Fridge explosion
Hi Spimps.
that appliance has a drop hole under both fridge and freezer evaporators (the defrost drain hole) where the r600a a would be quicky dispersed by the condenser fan on the rear. so we all wait to find out the cause of the true fault.
ps its hard to put a drop hole in a boat 😆 .
Bob
