Forum Replies Created
-
Posts
-
Re: Servis M9713 W/D
Hi Dave,
have you got the correct module, if you have the product code or s/no i can come up with the right module number and wiring diagram.Cheers Bob.
Re: Door hinge for proline PC226A fridge freezer
I have the Comet spares telephone number if Dave cannot help you 😮 , just reply back here if you need further help 🙂 .
Cheers Bob.
Re: Hotpoint WD52 Washer Dryer
Thank you Sparkyp,
i will wire the timer back up tomorrow and then tackle the no motor action problem that the customer first reported. its not the motor or carbons as i checked them on the last visit, dont you just hate follow up calls after joe bloggs down the road has had a go.Cheers Bob.
Re: Bosch KGV-3104-G/04 Fridge Freezer
Thank you sparkey,
most interesting, have you got a service manual by any chance.Cheers Bob.
Re: complete engineer
Result.
Fixzone telephoned today and have arranged a inhouse demo of the software in my office on thursday 17/02/05.
i will keep you posted.Cheers Bob.
Re: complete engineer
Ken its nice to hear that you and dave (and others) are working on this project, i for one will look forward to the outcome, i have in the meantime emailed Fixzone to ask if a demo is available.
i will let you all know if i receive a reply.Cheers Bob.
Re: Bosch KGV-3104-G/04 Fridge Freezer
Cheers for that Sparky,
i had already sorted out that there must be two thermistors, any idea which thermistor is the offender the fridge or the freezer.thanks Bob.
Re: complete engineer
Well the bit of info i recieved it is definetly worth a look at. Just the ticket if it does what it says on the tin, as for cost i agree Eastlmark its about right considering the cost of windows, office, sage, and quite a few more. no one likes spending money on a package that only does half the job. so lets be positive, surely the company who produced the package have a demo available, if not then its back to my pen and paper.
will give them a call on Monday if i find the time during working hours.Bob.
Re: Bosch KGV-3104-G/04 Fridge Freezer
Thanks again dave for the info,
armed with my trusty multimeter i am sure one of the thermistors is O/Circuit, placed a 20k resistor across the plug on the module and the appliance burst into life. 😀
i used to change the foamed in thermister on the candy products all the time, but i knew where it was located, would love to know the position of this little blighter and sort it out. but i will have to live with the mod i suppose. 🙄Cheers Bob.
Re: Bosch KGV-3104-G/04 Fridge Freezer
Cheers Dave,
the module and connecter on this appliance only has three wires going to
the module. Does this appliance have two thermistors to control both the fridge and freezer compartments, will have a go at the thermistors as i think the two screen or common connections may be joined internaly on the cabinate. would still like to see a wiring or mod diagram if anyone has
one available.Thanks Dave.
Re: Belling XOU181SS/1 Build in Oven
Hi Dave,
had a look at that part no. SW3018 on connections and it is not the correct part, the one i require is a small 2 tag circular limpit type cutout.
thanks anyway.Bob.
Re: Belling XOU181SS/1 Build in Oven
Cheers Dave,
Will sort that out on monday, have a good weekend.Bob.
Re: Indesit Evolution WE12S 1200 Help Help Help
hi Fox.
the eprom should be allready (flashed) programmed. is it in a holder or was it soldered into the pcb, if so was ESD soldering equipment used to do it as the eprom may have been damaged by the solering operation.
just a thought.cheers Bob.
