[BobHope]

Re: Capacitor American F/F

No problem Mark,
if you need some specifiction on compressors or comparison charts let me know and i will copy what i have.

Cheers Bob.

[BobHope]

Re: Capacitor American F/F

Hi Mark.
The run capacitor is used to improve the efficiency of the compressor to achieve the A rating class, the run current drops quite a lot when the capacitor is in circuit. Some compressors will work without it fitted but not as efficiently.

Cheers Bob.

[BobHope]

Re: Capacitor American F/F

Hi Kirk,
80uf is normal on that compresser, this is a start capacitor the 5uf one on your maytag is a run capacitor.
As john sugests any 60 to 80uf will work fine.
hope that helps.

Cheers Bob.

[BobHope]

Re: A happy New Year

A Happy new year to all. 😀

Deep thoughts for all involved in the Asian disaster including the rescue teams and aid workers. 😥

Cheers have a nice one.

Bob.

[BobHope]

Re: nardi range cooker

Hi Pinky.
Hope this helps. http://www.arien.co.uk/

Cheers Bob.

[BobHope]

Re: Painasonic NN-D801

Hi Clive,
have you checked the cooling fan.

Bob.

[BobHope]

Re: Tricity Bendix DH086

Cheers Chris,
have allready ordered inlet valve and pressure switch, nice to have a second opinion.
Thanks Bob.

[BobHope]

Re: SatNav

The one i have works on street names and not postcodes, it does let you enter codes but not down to the last 2 digits, enter town, street name and house number and of you go, parks the van outside of the house, if no number is entered parks in the middle of the street:D,99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} happy with it great on these dark nights.

Bob.

[BobHope]

Re: broken refridgerator hinge

Hi Peter,
the model no will be on the rating plate normaly located on the left hand side wall behind the bottom salad container. sure someone can help you once you locate the model no.

Cheers Bob.

[BobHope]

Re: Smeg DWF64SS

Thanks Dave and sorry about that incorrect posting,
the problem with the dishwasher was as reported on the main threed, impeller parted from the motor he has replaced the assy but reporting to me that the led,s are flashing during the cycle, if i have time i will call and have a look myself, had a look in the known error code but did not see a posting for Smeg.

Thanks again Bob.

[BobHope]

Re: CDA MX194 Dishwasher

Thanks ken will look at it tomorrow.

Bob. 😀

[BobHope]

Re: CDA MX194 Dishwasher

Thanks Ken,
this machine errors on power up even before the door is closed,
the error reads temp sensor if this is the same as the ones you posted,
does the pcb check for problems before the wash cycle starts ?.
all the haier ones i have done always error after the programe starts.

Cheers Bob.

[BobHope]

Re: CDA MX194 Dishwasher

Its not on the CDA technical disk Ken, unless you have the Hiaer manual.

Thanks Bob.

[BobHope]

Re: Samsung B1415J

Thanks again Dave for the info provided, wasn’t needed in the end (sure it will come in handy in the near future) just a simple silly burnt heater spade terminal, another job bites the dust in 15mins, thats the ones i like,
must say it looks an easy appliance to service.

Cheers Bob.

[BobHope]

Re: SatNav

hi all
i just purchaced a typhoon pocket pc with sat nav built in, fantastic piece of kit 😀 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} reliable with the benifit of small size and a pc to boot.

Bob

[Author]

Posts