Forum Replies Created
-
AuthorPosts
-
boselecta
ParticipantRe: Butler (smeg) dishwasher BDW7045 uphose required
hi eastlmark,
45cm, 5 years old approx, tubular heater, plastic base with anti-flood device, hope that helps.boselecta
ParticipantRe: New ISE10 leak.
Hi,
Got exactly the same problem from a 1607 leaking from the dispenser box down the front inside pannel. Ordered the dispenser box, cant identify exact position of leak on box as so small leak.boselecta
ParticipantRe: another candy gone bang
Ha she was given a Hoover machine as compensation.
Talk about kicking someone when there down!boselecta
ParticipantRe: Beko washing machine pcb required WM7335W
thanks Dave
boselecta
ParticipantRe: Indesit dishwasher giant askoll pump IDF125
thank you.
boselecta
ParticipantRe: Most expensive repairs.
Put a ceraimc hob on a Britania range oven £1149.02 for the part plus my £75 labour, £1224.02 in total, that will teach her for slamming down pans on the glass
boselecta
ParticipantRe: Stoves 900EF circulation fan motor
Thanks for replying Seamy,
Tried that circular fan motor but its a totaly different size, rang Stoves and turns out the circulation fan is now obsolete. 😥boselecta
ParticipantRe: Bosch Dishwasher Fire!
ha ha the best bit is the last 30 seconds he says “utter rubish, total fire risk”.
That after he set it on fire himself!July 13, 2011 at 10:05 pm in reply to: Samsung Q1457VGW/XEU washing machine dispenser housing #355544boselecta
ParticipantRe: Samsung Q1457VGW/XEU washing machine dispenser housing
Hi,
I had the same problem on very similar model not too long ago.
I had to order the lot as well as Im told the dispenser lids only are not available. 😥boselecta
ParticipantRe: Qualtex 30mm hotpoint spider & bearing kit
I have found the 30mm bearings I have fitted even after taking alot of time cleaning the spider up the bearings fail soon after, not so with the 35mm.
On all of them I have had to go back and fit a 35mm rear tub and spider.
I would have serious doubts about fitting a new 30mm spider and kit. 😐
boselecta
ParticipantRe: Bosch condenser dryer WTS86519 getting too hot
thanks martin,
will buy one and give it a try.
😀boselecta
ParticipantRe: Hotpoint BFI680 Hose clips
Have found in my local http://www.99pstoresltd.com (which seem to be taking over every single town in the country) they sell about 20 jubillee clips in a sleeve. Problem solved!
boselecta
ParticipantRe: Labor Rates For installing Integrated Appliances
Yes reading through it does include hanging the furniture door in the £84.99
boselecta
ParticipantRe: Where’s everybody gone?
Yes sorry to say I find navigation a bit tiresome now with the sub-headings making it a bit more tricky. 😐
boselecta
ParticipantRe: Labor Rates For installing Integrated Appliances
Definatley too cheap at £55, bear in mind Comet charge £84.99.
-
AuthorPosts
