[chezza]

Re: miele t650c

if door opens on it’s own, this is usually down to o/heat stat tripping ; check ducting isn’t restricted ( resettable stat on the internal lower ducting )

[chezza]

Re: Wascator interlock

If you go here > http://www.laundrysystems.electrolux.com/node67.aspx and click spare parts catalogue, then search, and by model, all brands, you can then scroll to exploded pics of the interlock section…. alternatively, jla 01422 822282 http://www.jla.com may stock parts
hope that helps, eddie

[chezza]

Re: Work Lighting

squadman wrote:I use a miners helmet which is so very useful ! Not only does it keep the light right on where you are working but the other week I had a angry customer who treid to hit me over the head with a frying pan, needless to say that helmet took the blow and I was ok !

I am now thinking of getting a Pit Pony to cut down on my motor running costs !

😀

did that snuff the candle out though ? that could have been a nasty H&S burn situation !

[chezza]

expertcat wrote:I tried it on once with an upright

was it a goblin ? 😕

[chezza]

snaponman wrote:i still keep in touch with a friend that works for hotpoint and they brought in the no smoking ban on the 1st. of june , even though he is the only person that drives the van and he never has any passengers he is still not allowed to smoke!

not a bother for me, as i never smoked, however i remember when i worked for whirlpool they banned smoking in company vehicles when they moved to the new purley way buildings late 1980s

[chezza]

Re: miele

worth also checking that it didnt go unbalanced and pinch wiring somewhere in the loom as it danced

[chezza]

Re: Miele T5206 Dryer

might be worth double checking the heater contactor, as they are a known weak point, assuming exhaust and vent side are all clear.
eddie

[chezza]

Re: Philips/Whirl wash motor

arosview wrote:My customer has a AWB 947/2 washer, about 12 years old. The fault is the motor brushes have gone. In the 16 or so years I’ve been doing this job. I have never had to replace these brushes before.

Can anyone tell me
a. Are the brushes replaceable, if so how, does the brush housing unscrew? it looks like it might crack if any pressure is put on it. Or do I have to change the complete end of the motor?

b. Are parts still available, or are they obsolete? It would be a shame the rest of the machine is as if it had come straight out of a showroom

Cheers David 😳

http://www.ukwhitegoods.co.uk/modules.p … 566#128566

😆 this might help ? 😆

[chezza]

Re: Lid Lock Solenoid

jla should be able to help there. part number used to be either 9124 or 9125 ( cant remember which, the other number was the eta relay which controls the lid lock )
01422 822282
http://www.jla.com
eddie

[chezza]

Re: Lid Lock Solenoid

you will need to know if it is one fitted by jla themselves ( cast body ) or the alternate plastic bodied one supplied by armstrongs if you ring jla.
eddie

[chezza]

Re: Falcon E1860 (Commercial) Fat Fryer

try euro catering parts…oldham way i think – sorry havent got details to hand
hope this helps

[chezza]

Re: RCD held up with superglue/sellotape

that’s truly appalling – everyone knows debor and duct tape is the correct method 😆

[chezza]

Re: The use of PTFE Tape

if ptfe tape IS used, it should only be the gold gas version, and only ever on the tapered thread fittings, not compression fittings.

[chezza]

Re: Maytag TD Mod: MDE5605AES

worth checking the ducting etc are all clear, if this is happening on an auto dry setting, also fan etc unrestricted.

[chezza]

Re: Zanussi LS6EA Commercial dishwasher

try the control centre – fairly universal part ( the peristaltic hoses are available seperately if this is all that is faulty )

[Author]

Posts