Forum Replies Created
-
Posts
-
Re: Later type Bosch/ Neff/ Siemens dishwashers
All these machines currently still OK! Had a Miele doing same thing this week.
Took off the panels cleared water from the base and watched through a normal cycle, no leaks. Customer has used every day since, no problems.
When I warned against opening the door when machine in use and hot, she said that they do, and always have. Could explain the problem, as the pressure build up when closing the door is considerable.Re: Later type Bosch/ Neff/ Siemens dishwashers
All metal tubs, no sign of leaking from the sump,( I’ve had that and perforations in the tub), so I’m stumped, especially as both the other machines haven’t played up for over a week now!! I’m thinking more “dodgy detergent” now than ever.
Re: NEFF S51M53XOGB/16 Totally dead
Yes Martin, had module out too, and couldn’t SEE anything wrong. All points to the board, but trying to eliminate everything I can.
Re: Zanussi ZDT41 dishwasher
Same fault, and definately no water in the base!
Can’t see a float as per most dishwashers, but 2 pressure switches on the side, which both appear to be working, and the tubes are clear. Any clues?Re: CDA WC140 IN Dishwasher
No, both pumps seem fine. It drains when it aborts. Wash pump is free to turn.
I’ve ordered a module, can’t see it can be anything else now.Re: CDA WC140 IN Dishwasher
Lights flashing are 1,2 and 5. According to fault codes it’s not taking enough water, but it is, and within timescale too.
It’s obviously not not sensing “full” and goes into flood protection mode.
Thanks for you info. I haven’t use Connect for years, but will try them.
Anyone know who actually makes these machines? I don’t recognise anything, although it has Bosch looks.Re: CDA WC140 IN Dishwasher
All wiring OK. Checked from plug on air brake sensor back to module, so I guess it’s a module fault after all.
Just seems odd that CDA parts stockists say upto 28 day lead time!!Re: BOSCH SMS 50E02UK/01 strange fault
Thanks guys. I’ve checked the socket and the machine end connection,but my thoughts are also leading to main board fault. Having not had a problem with this series I want to be as certain as possible before replacing a major component.
Re: BOSCH SMS 50E02UK/01 strange fault
Thanks for replying Martin, but which part of my description has the answer?
Customer has called today and said same thing has happened. Did one wash OK, no go this morning!Re: Miele W842
Sounds like the door release switch has stuck.It’s the only thing that can power the door lock.
Re: Creda 48907 wiring diagram
Is there anyone out there who might have a wiring diagram for this cooker?
The customer has been using it as is but would like to able to set main oven to auto cook.
I don’t want to get any further involved without a wiring diagram.
I can only think wires have been fitted incorrectly when the selector switch was replaced.
