Forum Replies Created
-
AuthorPosts
-
chuffy
ParticipantOk but how do you initiate a test procedure?
chuffy
ParticipantHi Dave,
Thanks for the response but my research indicated it was a (a10) heating fault and the heating element was indeed open circuit.
This was subsequently replaced and but the same error lights persisted and I couldn’t start a programme.
I have since managed to reset the error by more luck than anything else by switching on/off whilst holding in various buttons.
The appliance is now working perfectly but I would like to know how to do a reset for any future repairs on these appliances.Cheers.
Noel.
chuffy
ParticipantMany thanks …..slightly confusing but I do understand now.
Another job to walk away from.
Cheers.chuffy
ParticipantThanks for the response but this model only has 3 lights that run vertically on right hand side of fascia.
wash,dry and end! So it’s the top (wash) and bottom (end) lights that are lit along with the adjacent start button.
At the same time the salt, rinse aid and on/off lights which are situated on the left hand side of the fascia are flashing.chuffy
ParticipantRe: Fisher & Paykel dishdrawer DD60DCHX6 F5 error
Hi Dave,
Thanks for the reply.
I’ve looked at the manual ( albeit for a DD247) and it has been helpful but the no “F” error codes are listed.
Any chance of a link to my particular model?Thanks
Noel
chuffy
ParticipantRe: Whirlpool MWN410M Microwave E5
Ok thanks guys I’ll give this job a miss then!
chuffy
ParticipantRe: Whirlpool MWN410M Microwave E5
Same micro wave same problem.
What was the outcome?chuffy
ParticipantRe: Admiral / Maytag Whirlpool dryer belt
Thanks for the info but after a bit more research and cross referencing the part number I managed to get one from KAPARTS eBay.uk.
Ordered yesterday afternoon and it arrived this morning First Class Signed For. £12.41 inc. Result! Fantastic.chuffy
ParticipantRe: Admiral / Maytag Whirlpool dryer belt
Hi Don thanks for the reply.
I’ve been in contact with Interspares who say it’s in stock with their UK supplier but I’ll still be looking at a 5 day wait at least.
Customer very impatient so may have to abandon the job. -
AuthorPosts
