[clockworkone]

Re: Creda 37373 Dryer

looking at new shaft there is quite a difference.if rpm on both shafts are the same i would think new shaft will add up to 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} to drum speed.as iadom says it has to be motor as i doubt if theres anything built into mechanics of m/c to regulate motor.

[clockworkone]

Re: beko wma510

hi Shaun, these magnets are a pain.the only thing i can think of is that the bedding in of new brushes has caused slight vibrations to travel down armature. no visible crack when brushes replaced.Paul

[clockworkone]

Re: Creda 37373 Dryer

how much bigger is the motor pulley shaft. any increase in this size will have a great difference going from small to to massive pulley(drum)especially if there is no reduction in rpm of new motor.

[clockworkone]

Re: acm276 w/pool cooker

thanks Don, ridiculous prices being quoted. customer will ber at that price,2 required.paul

[clockworkone]

Re: belling idw604

thanks Seamy dimpco quoting silly money for this.waiting for connect to give me some idea when it will be back in stock.paul

[clockworkone]

Re: treadmills

thanks for that Bryan.

[clockworkone]

Re: beko wma1512w

thanks :tup: both of you for replies.i think it as you say has to be pr sw related.going back next week so will post outcome.paul

[clockworkone]

Re: Whirlpool 3RLBR8543JQ2 toploader

first thing to check is rubber clutch coupling between motor and gear box,easy repair if that is all it is.

[clockworkone]

Re: indesit cooker

it has been connected to mains correctly but i suspect that little hands have been playing about with it inside.it does have warranty but was not purchased locally so a bit of a logistics nightmare to return.my suggestion was the same and told customer to return it,but that not much good to tenant who has just moved in.will have a proper look mon morn.

[clockworkone]

Re: Indesit WIDL 126

did you specify to emw the exact board you required ie mk4 or mk8. also you need to locate the root cause of board going on these or it will just blow again i/lock a common failure.paul

[clockworkone]

Re: aspes dishwasher

thanks QUICK FIX for that.after a little research i have found part no and it is indeed fagor p/n v12b000a9.thanks again.

[clockworkone]

Re: creda solar grill

thank you Jim appreciate that.

[clockworkone]

Re: Miele WT2670 Cant get in it!!!!

presume it is top he needs to remove.usually 2 screws at back and 1 each side towards front under covers.hinged at the back so lift from front.paul

[clockworkone]

Re: model no please

thanks for that John.paul

[clockworkone]

Re: Nordmende DFSN60 DW

any water underneath it.collar under salt cap comes loose in these and leaks. hard to get info on these,they seem to be an irish brand.try kal.ie for info. paul

[Author]

Posts