Forum Replies Created
-
Posts
-
Re: Indesit WIDL102 fills & empties at the same time
It’ll also fill and empty if the wiring to ntc is broke!
Re: hotpoint aqualtis aqgd1695
It could be either of the boards! have you access to a hardware key to plug into the back port?
Re: Indesit WI 121 pcb on WI 101 will it work
Hiya Chris it’s been a while and good to be back!
@ ray how did the machine get on in test?Re: hotpoint wd440 aborting program
sounds like a module / eprom fault – fills up slight motor action both ways then no motor action at all. and i bet it’s one of the early ones with hot and cold fill..
as for overfilling, i would check the pressure chamber for blockage rather than changing the switch 😉
Re: Indesit WI 121 pcb on WI 101 will it work
it’ll have a different programme file will need reprogramming with a smartcard
Re: 0800 Repair
funkyboogy wrote:seen one driving about balieston ( glasgow) .. had a look at the site acording to site they are owned by………
We have been operating successfully throughout the UK for many years and can trace our roots back to 1996. 0800Repair is owned and run by Pacifica Group Limited which consists of a senior management team including Kevin Brown as the Group Managing Director, Scott Pallister the Group Finance Director and Paul Feek as the Group Sales Director.do they not own jtm / or have a tie in some where with them ???
Would this be the same Kevin brown that was involved in Northern Electric retail and the setup of franchises through freedom? and b2c?
interesting that the head office is in durham!!! 😯
Re: An analysis of how discussion forums work……..
no lol!
was just having a read of the forum then i found it 😆
Re: An analysis of how discussion forums work……..
Penguin45 wrote:1 forum lurker to respond to the original post 6 months from now and start it all over again.
_________________________________________________________.
whats a forum lurker ❓ 😆
Re: zanussi zwf 1430s
lists about 4 for e90 all to do with the electronics
wiring /pcb /display board
or configuration / software error
