Forum Replies Created
-
Posts
-
Re: pcb wireing for apm6852 //old board to new
Hi did anyone get hold of the PDF wiring for this subject is so can you please help thanks
Re: Hotpoint lft114 uk
Hi there appears to be a flap that looks like port at front but nothing behind it if I get other numbers can u help thanks
Re: Samsung washing machine model wf8702rss error code tE2
Thanks where would I find this sensor as not familiar with Samsung as I see so few thanks
Re: diplomat integrated dw ADP8352
CAME ACROSS A ZANUSSI DOING THE SAME AND WAS PRESSURE SWITCH FAULT OR IF GOT FLOAT IN BASE COULD BE FLOOD PROTECTION OPERATED
Re: Cooker hood fuses
i agree get it all the time a pain in the a*** normally put a 5 amp fuse in tends to do the trick
Re: Zanussi dishwasher ZDT6252
remove pcb you will probably see a dry solder joint or burnt patch on casing where a solder joint has failed you can re solder and away you go 😛 look in the area of main relay 😛
Re: White Knight 76aw T/dryer
had it few times whilst working for service force plastic seems to warp with heat white knight say no problem but ive fitted new assy and it warped after being used twice so dont know what to say overheating could be a cause
Re: Smeg DWF 84SSE D/W stopping half way through then wont s
fault indicating no fill , but as it filled initially it could be the alternating valve by the sump sticking which causes no fill the little gears inside wear and cause this fault
