Forum Replies Created
-
Posts
-
Re: ZANUSSI DE6744S wash light flashing
how many times does the light flash as it will indicate fault sounds like heater open circuit or module blown on heater relay very common on zanussi.if u take board out of case you will soon know it will be blackened inside case
Re: Zanussi zwd1470
not starting then lights flashing normally would be e52 motor tacho problem but without going into test and reading binary fault code hard to tell
Re: HOTPOINT DWF30 DISHWASHER
HAD A VERY SIMILAR PROBLEM ON A BRAND NEW ZANUSSI CANT REMEMBER MODEL N0 BUT SAME SYMPTOMS AND I FOUND IT TO BE A FAULTY PRESSURE SWITCH…NO GTD’S BUT WORTH A TRY
Re: Zanussi zwd1470
HAD THIS FAULT ON AEG AND ZANUSSI ALWAYS ON 47 MINUTES .IS A HEATING PROBLEM U WILL NORMALLY FIND HEATER TESTS OK IN WHICH CASE THE MAIN BOARD IS FAULTY…. OR SO I FOUND.. STANGE THING IS I NEVER GOT AN ERROR CODE SHOWING RELATED TO THIS,HOPE THIS HELPS
Re: zanussi zwx1600w
check the interface cable between main module and user interface tighten connectors gently wit pliers as they get loose causing strange problems and random error codes i.e E92 etc
Re: AEG Favorit F40650 PNC 91123263600 dishwasher
this appliance will not fault code with no heat and will run all way through program module in facia will probably have burnt out on the heater relay.. sorry no test info no longer working for service force.
Re: HOTPOINT TC71 ULTAMA CONDENSER
never had micro switch faulty but a simple continuity check will do.if that ok then your right it will be the timer unless it has a seperate reversing timer in base by motor as this can cause no heat also
Re: INDESIT DISHWASHER IDE1000 UK 2
thanks for your help did change module but makes no difference will check heater to earth thanks
Re: zanussi dishwasher zsf 6126
try checking the valve on the inner side of the iwms tank had a few faulty of late have also found faulty pressure switch b4 on a brand new appliance
