cornwell40

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 1,670 total)
  • Author
    Posts
  • in reply to: Candy CDB754D dryer sol. valve fault. #389764
    cornwell40
    Participant

    Re: Candy CDB754D dryer sol. valve fault.

    Oooooo 😕 Martin you might have something or not.
    The original call to this was that the dryer didn’t work …AND….the programme was jumping all over the shop. A little spray with switch cleaner cured that but wondering if there is something else.


    Tony

    in reply to: Candy CDB754D dryer sol. valve fault. #389762
    cornwell40
    Participant

    Re: Candy CDB754D dryer sol. valve fault.

    I’ve left it for a good while but doesn’t power up. Every time I visit the dryer stat is tripped ……..even though they don’t use the dryer while it’s faulty :rolls:

    Tony

    in reply to: golocal reactive #365921
    cornwell40
    Participant

    Re: golocal reactive

    Bryan wrote

    Let’s all report his sites as a phishing site to google.

    What for, phishing in the wind maybe 😉


    Tony

    in reply to: Hoover HDB854D/1-80 dryer fault #366591
    cornwell40
    Participant

    Re: Hoover HDB854D/1-80 dryer fault

    I DON’T BELIEVE IT!!!Exactly one year later (JAN 7th) and I have the same fault again from one of these. This time it’s a Candy CDB754d with no power to the dryer solenoid. Last time it was the board, this time tested the lot but getting nothing at the board when the dryer is on. Ordered a board direct from Gias which arrived resealed with packing tape after it had been opened. Noted this with the spares desk.
    Changed the board still no power to the solenoid. Now not sure if it’s a returned duff board or I still haven’t cracked the fault. I thought it was just a straight 240v fom the pcb edge connector all the time it’s drying, but anyone with experience of these point me in the right direction.


    Cheers

    Tony

    in reply to: ISE5 Mk2 vestel Door seal #387856
    cornwell40
    Participant

    Re: ISE5 Mk2 vestel Door seal

    Not the right one.

    Will fit but on spin the lower skirt catches the inner drum lip so had to go back and refit the old one. Not an IG call either 👿
    Still waiting for info from shop as David’s sunning himself this week.

    Tony

    in reply to: golocal reactive #365899
    cornwell40
    Participant

    Re: golocal reactive

    Hello Ace Repairs?

    Hiya, I have a local pub in your area with a faulty commercial oven. Could you look at it for us please.

    Have you got the make and model?

    Er….sorry ..no. I could call you back with that information.

    Where’s the pub..

    Er……

    Can I ask who’s calling us?

    We’re a company called Go Loc….PPPPRRRRRRRRRRRRRRR
    RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
    RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR.


    Sad Really!!1

    in reply to: Bosch WTC84100GB/01 won’t start #388912
    cornwell40
    Participant

    Re: Bosch WTC84100GB/01 won’t start

    :waving:

    Tony

    in reply to: Old Hoover A0113 bearings #388896
    cornwell40
    Participant

    Re: Old Hoover A0113 bearings

    :tup: You da man :tup:

    Thanks Tim

    in reply to: Diplomat AAA1473 E4 fault #388395
    cornwell40
    Participant

    Re: Diplomat AAA1473 E4 fault

    Beump!! 😉

    in reply to: Ariston oven DOV371B TOC #387884
    cornwell40
    Participant

    Re: Ariston oven DOV371B TOC

    Tis 😳

    in reply to: Ariston oven DOV371B TOC #387882
    cornwell40
    Participant

    Re: Ariston oven DOV371B TOC

    Oh Jim gas, electric….now you’re just being picky 😉
    It is part number C00156975. Thanks for the heads up Gents 😀


    Tony

    in reply to: Gorenje WA 61121 spider?? #387555
    cornwell40
    Participant

    Re: Gorenje WA 61121 spider??

    Managed to finally get the last of the screw out with easy outs and heat. Took a while but not my favourite job this week. Drum thankfully not required, thanks for your help on it Bazza.

    Tony

    in reply to: Vestel ISE5 E08 #385279
    cornwell40
    Participant

    Re: Vestel ISE5 E08

    Yup, a full compliment of assorted wedges to get any access to the screws. It can be done without upending it too 😉

    Tony

    in reply to: Whats the most annoying thing customers do? #108006
    cornwell40
    Participant

    Re: Whats the most annoying thing customers do?

    Was 95/97 worked out my stint with Hotpoint then joined a firm in Maidenhead for a year.

    in reply to: Gorenje WA 61121 spider?? #387554
    cornwell40
    Participant

    Re: Gorenje WA 61121 spider??

    Ta

Viewing 15 posts - 151 through 165 (of 1,670 total)