[cornwell40]

Re: Servis W/m

Board connections maybe. Have been advised in the past to nip together the pins in the plugs as these can cause all sorts of weird faults if loose.

Tony C

[cornwell40]

Re: Tecnik Dishwasher

Cheers Chris

Thats the one 😀

Tony C

[cornwell40]

Re: FUNNY NAMES

My sisters first boss was Neil Standing 😆

Tony C

[cornwell40]

Re: WDI 9091

Cheers Ken,
Found it straight away with your help 😉

Tony C

[cornwell40]

Re: LSI68AAA fault code

😳 Aye thats the one. Thats what comes of feeding the littlun when on t’internet.
Every time I nip home for anything during the day I get ‘could you just…’ then whatever I was doing flies out of my head. Cant wait till he gets a job. (18 years and counting 😥 )

Tony C

[cornwell40]

Re: LSI68AAA fault code

No ideas 😥

Tony C

[cornwell40]

Re: WDI 9091

Thanks Ken 😀
After doing this timer the expression ‘Cut me a bit of slack’ seems very apt. Old dear was insistent I change it even though the original was only tight on the switch pull. With the new one in it feels pretty much the same to me although she’s convinced its better :rolls:

I just hope its an obvious fault!!!

Tony C

[cornwell40]

Re: Indesit Co. and Connect

Whoaa!!!!!!
Just opened my Connect statement and in it is….
“Independents continue to play an important role in the development of our sales”

Which I think means we put people off buying another Indecesspit. 😆

Tony C

[cornwell40]

Re: Hygena AHY8102/1 handle

You’re a gent Penguin 😕 Sounds odd that, but you get my drift 😀
Tony C

[cornwell40]

Re: There may be the odd bobble in it.

Oh how the customers jaws dropped when you asked.

“Does your little Marmaduke collect Tazoes” before you’d even taken the back orff the machine. 😀

Tony C

[cornwell40]

Re: Best group/artist of the 70s

Magazine, Roxy Music, John Foxx era Ultravox, Sex Pistols, early XTC.

Faves the lottovum 8)

Tony C

[cornwell40]

Re: Appliances on “stand by”

dpm wrote

Isn’t that an isomer of the Dark that Dark-suckers capture?

Whoaaa!!! Deeeep 😥

Neil the hippy

[cornwell40]

Re: Bosch / Siemens wm suspension legs

Walked into one of these unsuspecting today. Wher can I get hold of the 13.2mm drill. The main engineering supplier for this stuff says that above 13mm I will need a larger chuck (pillar drill he mentioned :con: , try fitting that between the cab and the tub).

Tony C

[cornwell40]

Re: Gegsy Strikes Again!

Lawrence wrote

When o when will the manufacturers be held to account for there dangerous sharp edges and stupid designs.

Ah :lesson: I remember the gloves supplied in my first Hotpoint tool kit. Spent many a happy hour trying to use tools let alone pick up scews etc. But thats their way out innit, the old ‘should’ve been….’

All the best Gegsy. hope it wasn’t your keyboard poking finger 🙁

Tony C

[cornwell40]

Re: ISE not dog proof

Cheers K,

It opened the door after the wash had finished and ripped seven bells out of the washing. She sounded genuinely in shock on the phone :lol2:
Its a first for me.

Tony C

[Author]

Posts