Forum Replies Created
-
AuthorPosts
-
January 24, 2023 at 8:27 am in reply to: Aeg B8871-4-m pnc944-185-214 pyrolitic oven F5 fault #485510
Cras
ParticipantHi , thanks for the reply , I should’ve added that a new fan element and base has also been changed due to a low earth reading , so I suppose only the grill element left .
Cras
ParticipantCheers, will do. Thanks
Cras
ParticipantThat would be great thanks, email address is contracoolrepairs@gmail.com.
CrasCras
ParticipantThanks for the info I returned today and it was a faulty steam generator sensor it had shorted and was the original cause of the control board failing much appreciated Cras .
Cras
ParticipantRe: Montpellier supplier
Thanks .
Cras
ParticipantRe: Beko cfd540w
Thanks for the info
Cras
ParticipantRe: RSA1WTMH Samsung ambient question ?
Turned out to be a faulty fridge sensor
Cras
ParticipantRe: Bosch sps53m08gb/03 f19
Hi thanks , found your older thread earlier today Cras.
Cras
ParticipantRe: Bosch wvd 24460gb/04 f 18 dry side
Thanks for the reply powered valve up independently which was fine ,so presume board ,customer now buying new Cras
Cras
ParticipantRe: Bosch sps53m08gb/03 f19
Found this is a board fault caused by either faulty valve or dispenser just for future reference
Cras
ParticipantRe: RSA1WTMH Samsung ambient question ?
Yes put it into test mode no faults showing , customer says it’s been in garage for two years ,trying to work out why fridge display reads -3 degrees thanks Cras
Cras
ParticipantRe: Bosch wab24161 fault f16
Thanks for the info .Cras.
Cras
ParticipantRe: do you have a dead period?
And the moment you go away the phone doesn’t stop ringing
Cras
ParticipantRe: do you have a dead period?
Quiet in my part of the midlands ,hoping the warmer weather will kick start my fridge repairs
Cras
ParticipantRe: Second Hand Seller Gets Comeuppance
On my patch this ,what a tosser believe it or not he is less than a ten minute drive to a council tip
-
AuthorPosts
