Forum Replies Created
-
Posts
-
Re: Smeg WMFAB16 Pump
Thanks for your response, spoke to customer and she had already ordered one direct from Smeg who quoted 2-3 weeks delivery but asked if I would fit it when it arrived
Colin
Re: zanussi zwd16270 9146040301 no motor action.
I agree seems strange, I have had some odd faults on these due to low insulation on the motor and also dryer heater. Had one that was kept in an outhouse that refused to turn due to condensation on the motor carbons so removed carbons and cleaned with WD40. Could be something silly like belt?
If you need any info on the machine let me have you email
Colin
Re: indesit WD12X UK flashing led dial turning
How many flashes whilst the dial is turning – should be between 1 & 15 and this should give you the fault code
Re: Hotpoint CTD40G Dryer no go
Have you checked that the start button is not broken and that the small switches on the facia board are not damaged, I’ve had this a couple of times
Colin
Re: ZANUSSI ZDI6053X 911929218/02 DISHWASHER
Just found this, don’t know if it helps
If the electronic board detects a fault value from a sensor of the dishwasher at the start of the cycle, after 10 seconds of draining, it performs a check of all sensors for a period between 3 and 5 minutes, and no single component is activated.
leave switched on for 5 minutes, after which the program should return to normal as this may well be the only issue Reseting the program during the diagnostic test will only postpones the start of the cycle
Colin
Re: zanussi auto pnc 914510916/00
Very odd as only the sole motor listed for this model, have you got or can you get the make and number from the motor ?
Re: Booking System!
Just Seen your post try this link
http://www.chaossoftware.com/products-legacy.aspxSays works upto XP but I run it on a Vista & Windows 7
Colin
Re: Booking System!
Used time & Chaos for the past 15 years, as a legacy programe its now a free download at http://www.chaossoftware.com/chaos32-legacy.html
Colin
