Forum Replies Created
-
Posts
-
Re: Whilpool American side by side
It depends what you call really hot 😉
The gas from the compressor is pumped around the door area to prevent ice from forming so warm is normal but quite often it feels hot especially in warmer weather.
If the unit is funtioning normally otherwise it’s probably nothing to worry about 🙂
Dave.
Re: Teba TCF1360SS Grill Element
Bob, I have some Teba elements, can you let me know if the terminals are central, to the right and whether the element is a single or twin ?
You can see them in the shop@ as wel for picciesl.
Dave.
Re: Trade Members
whitevanman wrote:Who ‘If you need to find out please ask as we can easily check for you’
Generally Ken or myself Wayne, a PM to kwatt or me and we will answer any questions for you where we can 😀
Dave..
Re: Trade Members
whitevanman wrote:How would you know if someone is a trade member on the online list
Generally trade members will only post in the trade forums but not always 😉
If you need to find out please ask as we can easily check for you 🙂
Dave.
Re: Iceline FF
I guess it depends who made it, possibly a Servis. Any other numbers on it anywhere ?
Masterpart may be able to source as they seem to have pretty good contacts with the large retailers.
Dave.
Re: JMB spares
SEME as the fridges (as far as I know) are all made by beko 🙂
They certainly list this model on SALI but not the thermostat 😕
Dave.
Re: Qualtex Increase Staff
scots wrote:And how do you get an account with qualtex.
Send an email to info@qualtexuk.com that should get the ball rolling 🙂
Dave.
Re: Subscribers spares deals
I’m going to revive this nearly year old thread even though it’s not a “deals” offer but read on please……. 😉
Some of you may or may not know but I currently work from home in what was once a spare bedroom after having spent over 20 years in a partnership running a repair and spares business, eventually I got fed up being held back in my endevours (family bussinesses :roll:) and left the partnership to work for UKW full time as a director and handle the spares side as well as admin etc which I was already doing but not on a full time basis. Anyway, that’s a brief history…….
I will soon be relocating to a dedicated unit (not an institutional one :lol:) where I will be carrying on the same as well as handling the ISE spares distribution etc. Not surpringly I suppose, some of the main wholesalers I mentioned this to in my day to day dealings with them have an interest knowing that we (UKW) reach so many trade guys which got me thinking, so, my initial questions are…..
Would you guys buy from UKW if we were to take a distribution deal from any of the wholesalers ?
Would a trade spares website that you can buy from linked directly from UKW be of interest ?
If you did buy from UKW, what would you like done that the wholesalers can’t do/offer you ?
Any replies or comments will be of interest please as this is a cursory feel about on the subject 🙂
Cheers.
Dave.
Re: Servis M0330s freezer problem
It’s probably over-iced again which would indicate a defrost problem.
If it has then it will have a fault with either the defrost heater, defrost probe, thermostat or possibly the PCB which may require an engineer. The repairs@ link below should provide one if required 🙂
Power off if checking yourself please :zap:
Dave.
Re: CREDA 42350 Hob
6224643 is the genuine.
It’s a 2kw red spot if it helps, universal types will be cheaper no doubt 😉
Dave.
Re: belling 492SS oven. ser. 35-1-00332
The Stoves part number is 082604989 but as it’s made by Creda 6222155 is probably the cheaper option 😉
Dave.
Re: Belling IDW 601
This one is made by Smeg and the control PCB has locked up for some reason.
Try powering off for a few hours and see what happens.
Other than that, it’s engineer time to be honest as other component failures can cause software errors on these. Please check the repairs@ link below should the need arise 🙂
Dave.
