Forum Replies Created
-
Posts
-
Re: Smeg DWI614 in “C” mode
Try this:
Make sure the machine is switched off from the on/off switch on the control panel. Close the door. Open the door and switch on the machine using the on/off switch and within 3 seconds press the programme button 4 times then switch the machine off again.
That should reset it.
Dave.
Re: Repairs@ Module
funkyboogy wrote:you may be doing this , as i havent seen how an unregisterd user see,s UKW???.
Log out and have a look 😉
Repairs@ is right at the top of the home page with a “Do you need an engineer” link 😀
Dave.
Re: Hotpoint WMA63 burning smell
As no-one else has mentioned it, the bearings may be wearing which would explain the belt position on the pulley.
Is the machine noisy on spin (rumbling etc) ?
If the belt was badly worn/stretched it would have fallen off by now 😉
Dave.
Re: fixed Blomberg 1301 PCB tracks is this dangerous?
We can’t obviously judge on the quality of the repair but repairing blown tracks on PCB’s etc is quite accepted and common practice 🙂
Dave.
Re: defy spares
I found this:
Defy wrote:» DEFY OWNERS OUTSIDE SOUTH AFRICA
It may be possible that the freight and import taxes far exceed the economic viability of importing parts. Therefore we suggest that you contact your local repair and spare specialist and try to obtain compatible parts, e.g., where this may be possible:* Compressors and thermostats for refrigerators.
* Spiral and solid plates, switches for these plates.
* Thermostats, elements for stoves, ovens and hobs.In case of front load autowashers, the original design was a European origin and items such as motors, fan belts, thermostats and timers may have compatibility with other products in your country.
However, should all else fail the parts can be supplied ex South Africa by sending an email to iholland@defy.co.za.
The following information is required:
* Model number
* Serial number
* Description of item
* Function of itemUnless anyone else knows ?
Maddocks are probably a god bet as well.
Dave.
Re: siemans cooker, need pt/no please.
Tell, save this to your favourites:
http://www.bshappliancecare.com/Bosch/boschspares.html
Click on the “Quickfinder” application link and all Bosch/Neff/Siemens models are there 😀
Dave.
Re: Hoover CA232 Timer ??
Masterpart’s picture is also wrong 🙄
It is the right part though I ordered one the other day from them for someone 🙂
Dave.
Re: Ocean Fridge/Freezer Controls
That’s because Brandt make this model for Comet (Proline is their brand name or one of them).
The spares diagram is pretty awfull but it looks like just a fridge and freezer thermostat controls on the front ? 😕
If that’s the case, 0 is the warmest and whatever the highest number is the coldest.
Comet for the manual I’m afraid 🙁
Dave.
Re: Diplomat Select GT60
Capital repairs on 020 8866 6699 will be able to help 🙂
You can also contact them through repairs@ now as I see where the slight error occured. We added gas oven as a new appliance type recently and for some reason their info didn’t get updated to include this 😕
Now rectified 🙂
Dave.
Re: Hoover CA232 Timer ??
91201337 is the motorised selector, there is no timer as such on this model as the PCB controls everything.
They do play up though (the selector).
Freefind info is incorrect 😉
Dave.
Re: DAEWOO DOOR SEAL
Connect or SEME should be able to supply but the model number’s not recognised.
It will probably the whole door as well 🙁
Dave.
Re: Samsung Refrigeration Bits
Alex wrote:SS205S92/XEU Ice dispenser complete
The model number appears incorrect Alex, there is an SS20S…. so I guess that’s the one. Part number DA59-30103E
Alex wrote:SRS2025CVW Fridge Defrost Element
Only the complete fridge evaporator (but the heater can be removed/swapped apparently) DA96-00013B
Alex wrote:SR-L 2928B Fridge door, facia panel & rotating ice tray.
That’s definitely incorrect 😉
Dave.
