[Dave_Conway]

Re: Whirlpool dishwasher G2P DW1 flashing and beeping at me

If the light is flashing steadily with no obvious pauses then the NTC is the most likely culprit as your engineer suggests 🙂

Dave.

[Dave_Conway]

Re: ufindus . com

Do they have a contract ?

It looks just like a free listing site to me 😕

Dave.

[Dave_Conway]

Re: AEG D/W 40740 Won’t Heat

myfil wrote:Can anyone help with PCB Diagnostics for this machine. (It only has indicator lights, no numerical readout). Help much appreciated.

On the way 🙂

Dave.

[Dave_Conway]

Re: zanussi Dishwasher

The model number would help Ashby 😉

Dave.

[Dave_Conway]

Re: Bosch WFL 2260 drain pump

Nearly…..

:wave: 😆

[Dave_Conway]

Re: Caple dishwasher fault code

terrarepair wrote:I beleive it is a badged whirlpool

It’s actually a Smeg 😀

On the main PCB LED display is it just number 5 that is lit (no others flashing etc) ?

Dave.

[Dave_Conway]

Re: Nardi Integrated Dishwasher model 200341035460

Eek it’s a Servis 😯

I would think either the latch is worn or the hinges have become “strained”:

Door latch – 720064000
R/H Hinge – 246004100
L/H Hinge – 246004200

Dave.

[Dave_Conway]

Re: Whirlpool G2P DWS COLD ONLY?

buseng wrote:I am a bit disapointed about the lack of response on this forum about this problem

I don’t think anyone has a definitive answer to be honest but any advice is offered freely 😉

I would tend to go with another NTC personally to rule that out, if that fails then maybe a call to Whirlpool as their service network will have a piece of hardware that can run a full diagnostics test on the PCB 🙂

Dave.

[Dave_Conway]

Re: leisure control knobs

The hotplate/grill knobs about £2 each from SEME but the oven knob is £15 for some reason, checked with Connect as well and they show a similar price 😯

Dave.

[Dave_Conway]

Re: Samsung Q1235 Door seal

DC97-08145A is the part number. Connect or SEME will be able to supply 🙂

Dave.

[Dave_Conway]

Re: Hoover Special Edition Washer Dryer HSW110M

dan0k5 wrote:I just want to know why it feels warm after a cotton wash it is not warm after a synthetics or delicates wash.

Are you sure, it sounds like the hoses are on the wrong way round to me (rinsing in hot/warm water) 😉

Apart from that, the extra friction of the higher cotton cycle spin speed may be the cause.

Dave.

[Dave_Conway]

Re: Rowenta Gourmet FC51

Only Connect will be able to supply, their part number 5031681254494 at £16 ex VAT, special order.

Dave.

[Dave_Conway]

Re: Servis 6kg Washer/Dryer Wont spin..

As Iadom mentioned, check the belt for damage/slackness (with the power off :zap:)

Nearly all Servis faults with no spin are caused by the module if the belt is OK, most are in excess of £100 🙁

Dave.

[Dave_Conway]

Re: WDM120 Washer Dryer – no spin

If the brushes are OK, it can only leave the motor itself 🙁

These are prone to fail with this symptom.

Around the £90 mark from memory. An email to spares@ukwhitegoods.co.uk please for confirmed prices 🙂

Power off when checking the machine :zap:

Dave.

[Dave_Conway]

Re: zanussi fjdr 1466w

The faulty pump has damaged the control PCB by the sound of it 🙁

There is no component level information so a replacement PCB is the only option if that is the case (£90 ish).

Power off when checking please :zap: or check the repairs@ link below 🙂

Dave.

[Author]

Posts