Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: BOSCH WFP 3300 FAULT CODE F05
Bosch part number 496875 is the motor end frame surely Gegsy, it’s £40 odd ?
BS12102 is the pattern alternative as Bosch don’t supply those type of brushes on their own. The terminal is made that way to connect where the old brush was connected, I’ve not fitted a pair for a while but I’ve not had any connection problems with them 🙂
Some technical blurb on them:
special terminals to eliminate the need for soldering in to the carbon shield
Hope this helps.
Dave.
Dave_Conway
ParticipantRe: Whirlpool AKG 342/WP Fan Oven – No power
The safety thermal fuse has failed I expect.
Is the timer/clock still running ?
Dave.
Dave_Conway
ParticipantRe: LG Dishwasher LD-12AW2
It sounds as if you have a blockage or the drain pump has failed.
Check the waste outlet etc, if you decide to look further inside don’t forget to unplug :zap:
I would have thought most engineers would be able to help though as the water drain parts etc are no different on LG than any other dishwasher to be honest 😉
Dave.
Dave_Conway
ParticipantRe: SMEG DWD612SS DISHWASHER
Odd one this, E8 certainly refers to the water diverter but if it’s been replaced 😕
Thinking about it though, how does the PCB know the diverter is faulty ? I can’t see any pressure switches or diaphragms anywhere in the water circulation area.
Is there a blockage anywhere or filters misplaced/missing as this can cause it according to Smeg’s tech info ?
Dave.
Dave_Conway
ParticipantRe: Miele vac tube
There won’t be I’m afraid, which model is it ?
Dave.
Dave_Conway
ParticipantRe: Caple dishwasher fault code
If it were the other way round (1 flashing and 5 on) it would be an E1 error but that is an unknown one you have there 😕
Engineer time to be honest as other components failing can cause odd error codes on these (software gets confused ;))
Check the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: Indesit idl705
If you let it run does it not show any error codes (lamps flashing) ?
Dave.
Dave_Conway
ParticipantRe: whirlpool cooker akg 668/av
It’s a Stoves made oven 😉
Is the cooling fan actually running ?
Dave.
Dave_Conway
ParticipantRe: Diplomat Select GT60
Can you post the MFI model number please from the rating plate as per this post:
http://www.ukwhitegoods.co.uk/modules.p … pic&t=6079
Also, what do you refer to as a starter ?
An engineer can be located from the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: ufindus . com
Hmm, there’s certainly a lot of complaints about them 🙁
So, they offer an enhanced listing and charge extra for it even though a customer would still find you from the free listings which they obviously get from BT as I am listed on there with a non-advertised number and they have never made contact.
The only hope really is if they have misrepresented their services or overcharged.
What are the dealings so far ?
Dave.
Dave_Conway
ParticipantRe: Hotpoint CTD85/31358 Condensor Dryer
There’s some technical blurb on this model on Partfinder about replacing the thermostats and thermistors as a kit which seems more likely.
Serial number required to identify the correct one, 31358 is too short ?
Dave.
Dave_Conway
ParticipantRe: Tool kit
You could try these guys:
http://www.twinternational.com/acatalog/
Mention UKW, you may get a discount 😉
Dave.
May 23, 2006 at 12:00 pm in reply to: Whirlpool dishwasher G2P DW1 flashing and beeping at me #177287Dave_Conway
ParticipantRe: Whirlpool dishwasher G2P DW1 flashing and beeping at me
It’s a very common part, we sell loads of them 😉
You can get one here:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=476
Dave.
Dave_Conway
ParticipantRe: spare parts
williemac wrote:spare parts for GDA APPLIANCES
They are the same as Hotpoint if it’s a UK model
williemac wrote:wiring diagram for tricity president 2557
On the way by email shortly
williemac wrote:Hotpoint D/W 162 full wash light flashing
What’s the full model number ? The codes should be in the known error codes thread in the trade technical forum.
🙂
Dave.
Dave_Conway
ParticipantRe: SERVIS M7665FF problems
Can you hear the motor (compressor) running all the time and never cutting out as this sounds like a system failure to me ?
Dave.
-
AuthorPosts
