[Dave_Conway]

Re: aeg oko 1370 605423909

A couple of interesting snippets about this one I’ve found:

Check the water distributor unit and also the programme selector gets oxidsed contacts which also causes odd errors like this.

Dave.

[Dave_Conway]

Re: Hotpoint WD420 power loss

Mart71 wrote:any ideas before I call Hotpoint??

From that I assume that is less than 12 months old ?

If so, please phone Hotpoint as there is clearly a problem with the machine 😉

Dave.

[Dave_Conway]

Re: Bosch FF icing regularly

richardm wrote:I don’t have model number to hand

We’ll need it please 🙂

Dave.

[Dave_Conway]

Re: indesit w103 fault codes info

All here for you:

http://www.ukwhitegoods.co.uk/modules.p … topic&t=40

Welcome to the site by the way 🙂

Dave.

[Dave_Conway]

Re: Water collecting in bottom of MFI Larder Fridge APP 6302

jbs wrote:Does anyone know where I would get a complete replacement door from?

Yep, right here 🙂

Total cost inc VAT and carriage £43.19

An email to spares@ukwhitegoods.co.uk please if required.

Dave.

[Dave_Conway]

Re: philco washer dryer wd 2002s door switch

Not unique but special 😉

Part number C00052745 at £18.76 ex VAT and carriage.

I can order if required, an email to spares@ukwhitegoods.co.uk please 🙂

Dave.

[Dave_Conway]

Re: For the record

Delete without comment next time if it’s off topic methinks 🙂

Dave.

[Dave_Conway]

Re: indeset idl500, advice please

This should help in removing it:

http://www.supergluecorp.com/removingsuperglue.html

Both parts are seperate if it cannot be removed but shouldn’t cost more than £20 for both the control panel and button should they be required.

Let us know how you get on please, and power off at all times until resolved :zap:

Dave.

[Dave_Conway]

Re: Creda Xpression X 152e Cooker Top Oven and Hotplate prob

Basically yes 🙂

Dave.

[Dave_Conway]

Re: Diplomat integrated ad8242/8332

It depends which one of those you have 😉

ADP8242 is a Smeg manufactured and the ADP8332 a Whirlpool

Both completely different appliances… 😕

Once you have this, use the forum search and search for F1, there’s plenty of info on both types in there 😀

Dave.

[Dave_Conway]

Re: Hotpoint TDC30 T/Dryer

I think you’re right TBH, nearly all driers run at 60C.

Dave.

[Dave_Conway]

Re: zanussi de6965 problem since moving house

It probably was tipped on it’s side causing the residual water left inside to activate the anti-flood protection.

I wouldn’t worry if it’s working to be honest, just keep an eye on it the next few cycles 🙂

Dave.

[Dave_Conway]

Re: Creda Xpression X 152e Cooker Top Oven and Hotplate prob

Two unrelated problems I think.

I would be looking at the grill regulator and either the hotplate selector switch and/or the hotplate itself as both are prone to failure.

Dave.

[Dave_Conway]

Re: Candy dq130 Washing Machine

I agree with Iadom, it sounds like a partial blockage not allowing the water to clear quickly enough which may explain why the short spin works as not as much water is expelled 😉

To identify the module, I will need the full serial number starting 3…… please as there are a couple of versions.

Dave.

[Dave_Conway]

Re: Candy CD474

There appears to be three in there:

91200490 (four terminal, the main one I think)

91200492 thermostat 45C

91200491 safety thermostat (4 terminal multi-plug)

No thermistors that I can see, I’d order the first one personally and go from there 🙂

Dave.

[Author]

Posts