[Dave_Conway]

Re: Planning to buy a new fridge?

Your collegue Oliver posted four times in various forums here regarding this a few days ago:

http://www.ukwhitegoods.co.uk/modules.p … hor=Oliver

Please restrict this to one request as duplicates will be deleted.

Thanks.

Dave.

[Dave_Conway]

Re: homark model 02 700301 type b11

Are you sure there isn’t a fault with the oven ? The instructions I sent are a pretty close match and the only ones now available I’m afraid 😉

This is a fairly old oven…

Dave.

[Dave_Conway]

Re: My Smeg DWI 710 E1 dishwasher has a mind of its own

Cawi wrote:Could you give me a quote for the circulation pump (plus postage) please? How long does it take for it to be delivered?

The whole motor and pump is 695210296 at £111.14 plus VAT and carriage but you may be able to replace just the pump part number 690070483 at £34.06 ex VAT, have a read of this thread although a different model the principal is exactly the same:

http://www.ukwhitegoods.co.uk/modules.p … ic&p=79163

Same contact details for further info 😀

Dave.

[Dave_Conway]

Re: Smeg DWF66 Impeller died

You should be OK just replacing the pump housing if a new bearing in the motor does the trick 🙂

Part number 690070529 at £32.07 ex VAT and carriage, an email to spares@ukwhitegoods.co.uk please if you’d like one

Dave.

[Dave_Conway]

Re: Servis Ecocare 1000 No spin

I’m afraid dampness will almost certainly have damaged the module, these are quite expensive (£80-£90) so it may be worth asking an engineer to attend and confirm 🙂

Check the repairs@ link below .

Dave.

[Dave_Conway]

Re: Hotpoint DC28 error code help please:)

That’s a no drain error so it appears the machine “thinks” it’s not empty even though it is.

Possibles are blockages in the pressure system or the pressure switch.

Engineer time perhaps ? Check the repairs@ link below.

Dave

[Dave_Conway]

Re: Hotpoint DC28 error code help please:)

Could you indicate counting from the left which lights are on numerically please 🙂

Dave.

[Dave_Conway]

Re: zanussi fx1465w door lock?

It looks like it may be 🙁

All the E4? codes relate to the interlock and/or faulty connections or the PCB.

Dave.

[Dave_Conway]

Re: Zanussi FS 1555 W help needed

I think it’s E51 in that case, 5 flashes followed by 1 (there is no E15)

Short circuit motor/faulty PCB which goes along with the above.

Dave.

[Dave_Conway]

Re: zanussi dishwasher DW15 TCR control panel

I don’t see why not, you can see the contact details here:

http://www.masterpart.com/m1home.asp

I can order it for also if required.

Dave.

[Dave_Conway]

Re: Zan FJ1254W

I’d be more inclined to suspect the door lock to be honest, the “instant release” type are quite common for intermittency 🙂

Dave.

[Dave_Conway]

Re: zanussi dishwasher DW15 TCR control panel

Masterpart have one in stock for about a tenner 😉

Dave.

[Dave_Conway]

Re: smeg sra25x2 ****how much ***

I know, it’s mental the price from Smeg for the Retro fridge parts. They are actually made by Gorenje, if you can get the “ART” number from the rating plate I can probably come up with their part number for a fraction of the cost 🙂

Dave.

[Dave_Conway]

Re: Smeg!

It’s a PL312 😉

No idea where GB Senior got the prefix from, possibly his horns were in the way 😕

Dave.

[Dave_Conway]

Re: I have changed the pressure switch no luck INDESIT WIDL

That looks like an F03 fault in that case, temperature control problem.

Use the search and look for F03, plenty on that one in the Indesit and Ariston related posts 🙂

Power off when going in :zap:

Dave.

[Author]

Posts