Forum Replies Created
-
Posts
-
Re: NEB Venezia FE8622EX s/o
Timer button 091517000104R about £3 in stock at Mastepart
Element 040499009927R about £15 out of stock at Masterpart but Qualtex ELE2045 is the same and they have stock 🙂
Dave.
Re: Smeg!
Funnel – 769330048 – list £2.64
Part that screws in to the funnel – 698410420 – list £2.58😀
Dave.
Re: Dishwasher rumble (Whirlpool ADG 7540)
Deliberately jam the spray arms in turn to stop them rotating and run it empty on a rinse only (no heat cycle) to eliminate them, it’s probably one of them though 🙂
Dave.
Re: Hotpoint WMA13P
It is now 🙁
Comes with new pressure switch, pressure hose, sump hose and pump flap valve 😕
Dave.
Re: Whirlpool G2PDWI
The only fault that is not indicated to the customer is F0 which is the optical sensor failure (or covered in gunk ;))
The cycle completes but the PCB selects the hottest wash available ignoring the sensor failure.
Dave.
Re: Hotpoint DC27P Wash light Error code
Which light is this flashing please, counting the lamps from left to right ?
Dave.
Re: diplomat ADP 8342 just packed up
titch wrote:From what I have read on here about this model is it worth paying to have it repaired or just cut my losses?
Sadly the latter may be worth considering. This is a Haier manufactured (?) appliance, notoriously unrelaible and virtually no technical or spares information 🙁
Dave.
Re: Ariston fridge light problem
From the parts diagram it appears to be controlled by a sensor in the door (no tech info available from Merloni as is normally the case for their products :(),
Personally I would remove the bulb and not worry about the light as the solution may well be an expensive repair to be honest.
Dave.
Re: whirlpool adg722 dishwasher
Whirlpool fault codes only go up to F9 (9 flashes), if it’s definitely 10 then there may be either a software error on the PCB or another component failure is causing “confusion”.
Engineer time to be honest as these are complex appliances, check the repairs@ link below 🙂
Dave.
Re: Indisit WE12 SUK
Possibly John but I’d rule out all the other possibles first, these EVO controls are notorious for obscure faults.
Broken leads on thermistors are a common one that seems to throw up strange symptoms along with poor connections on the edge connectors 😕
Dave.
Re: Electrolux Double Oven EOG9330 – Oven Door is Loose
As WVM says, new hinges and possibly hinge supports required, we’ll need the product code to identify please, it will be around the door on the rating plate and begin 9442?????
Dave.
Re: Diplomat 8322
The part number Chris gave is correct, 481236158432 doesn’t exist but there is also an error on the MFI disk which gives 481236158434 which is also incorrect 🙂
It’s a Whirlpool by the way 😉
Dave.
