Forum Replies Created
-
Posts
-
Re: Nonsense
Dave_Conway wrote:I must set a reminder to check them once a week I think 😉
I wish I had actually done that now 😯
An hour deleting spam from the reviews is not my idea of fun 🙁
Dave.
Re: Dishwasher identification
It’s probably a BF50, part number 1801572 £100 ex VAT list though 😯
The Brandt part number is 31X8374 (kit) which is a tad more reasonable 😉
Dave.
Re: Samsung Side by side fridge freezer problem
slytrellis wrote:Also the engineer told me that expert appliance care are closing down in a couple of months… any one know anything about this?
Yes, it’s true:
http://www.ukwhitegoods.co.uk/modules.p … e&sid=1539
Dave.
Re: Nardi Appliances
steve486 wrote:For the time being Nardi spares can still be sourced from EAC.
But, will they order any non stock items from Italy as they won’t be about to dispatch when they arrive ? 🙁
Dave.
Re: Electrolux Fan Oven Not heating.
To save time emailing, if you do need the element, click here 😀
Dave.
Re: Schreiber lower left door hinge
Hi Steve,
Those models aren’t correct I’m afraid but the hinges mentioned will almost without doubt be the ones you need.
246009800 is top right or lower left and 246009700 the opposite corners so you need 246009800 🙂
Both taken as you look at the appliance from the front
Dave.
Re: kuppersbusch ekw306.0 hexagon ceramic hob
If you PM NWAR (Craig) he should be able to help with spares for these 🙂
Dave.
Re: Belling Synergie
“Part Code” then “Any” recognises 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of all part numbers 😉
Dave.
Re: Partfinder DVD
Roy Todd I would think:
https://www.theservicecentre.co.uk/Service/b2bkey.html
😉
Dave.
Re: Neff 1452 oven elements not working
dedics wrote:On one of the previous posts (about a 1320 neff oven I beleive) an over heat cut out sensor was mentioned Is it possible that this has tripped on my oven and is causing the problem?
It sounds like it to be honest.
Can you get the full model from the rating plate (Enr…….) we can help identify correct part(s) for you then 🙂
Dave.
Re: Hotpoint TDC32 – water container leaking
MBrammer wrote:I think it is the O-ring seals where the container fits into the machine proper could need replacing. Where can I get them from?
From Hotpoint you can’t I’m afraid, they only supply the whole container and the part that it locates on to (float chamber).
You can get generic O rings from most decent DIY centres, if you get stuck for the above parts if they need replacing let me know 🙂
Dave.
Re: Belling Synergie
As it happens yes but only the fan element – ELE2048 (Qualtex) 😀
The Servis grill element 524013300 appears to be an alternative but hardly any price difference and no stock 🙁
Dave.
