Forum Replies Created
-
Posts
-
Re: jackson by creda washing machine J1000
That’s the plastic door trim yes, which should be all you need normally.
It’s £13.06 inc VAT and delivery (the email will come to me if you need to order).
Dave.
Re: Smeg 80cm range cooker
Those links won’t work copied and pasted from your browser like that I’m afraid, they are session created and temporary.
You should be able to find the direct url to the picture then use the side of the url and the pictures will appear here.
If you can’t, email me the pics directly as attachments and I’ll have a look.
Dave.
Re: Bosch fridge freezer KGU3104GB/03
Are you sure the model is KGU3104GB/03 as I can’t find it listed ? 😕
If it’s the type I think it is though, this thread should help:
Siemens and Bosch are the same thing essentially 😉
Dave.
Re: Candy Alise 105 Drum Bearing Maintenance…
Evren, as the bearings are failing do you really want to keep on trying to repair this appliance ?
I’ll need the product code to gain the spares info for you from inside the door , 3???????????
As a guide though, if this has a combined timer/control unit you are looking in excess of £100 for the part.
I honestly think as previously suggested it’s time to call it a day on this one.
Dave.
Re: Bosch Upright Freezer
Try leaving it off (24-36 hours) as this will allow all of the ice that will have built up while the door was open to defrost.
Let us know what happens after that please.
Dave.
Re: miele w736 washing mashine
I don’t quite know what you mean by “clicking” but it may well be an object in the pump/filter hitting the pump impellor.
Have you checked the filter ?
Dave.
Re: COMPRESSOR CHANGE
I don’t charge less than £125 to fit one these days, the trouble is, as Ken says, most chargeable customers won’t bother with that and we hardly if ever get the call to fit them I/G anymore.
Low cost appliances, and people wonder why there’s a fridge mountain 🙄
Dave.
Re: Hotpoint Aquareius DF41 – error code 20
From Hotpoint’s online info (their words not mine):
“E20 – Temperature under range. Book an engineer.”
Basically, it’s not heating the water which could be down to a few different things, heater, thermostat, control unit…
Probably time to call an engineer as Hotpoint suggest, try the directories or repairs@ there should be someone there who can help.
Dave.
Re: Bosch SGS47E02 mystery programme
They aren’t seperate programmes that’s why 😉
The programme is “Auto” and will wash your dishes between 55C and 65C depending on how much solid waste is detected in the water, it also lengthens or shortens the wash cycle accordingly.
Dave.
Re: Electrolux Built in double oven fault
Well, the fan element has gone/blown that’s for sure, although this wouldn’t explain the trip blowing when the conventional oven is switched on as it would also “trip” the MCB when you attempt to use fan assisted mode.
My only thought on this is that the base element may have failed to earth as well but as you probably don’t use the conventional mode the problem never highlighted before.
If the grill has been OK up until now, that one should be OK.
Dave.
Re: blomberg fridge freezer problems
Blomberg is the brand name used by Comet, it could be one of a few manufacturers.
If you could check inside the fridge for the model number (next to the salad bin normally) I’ll check out a bit more info for you.
Dave.
Re: leaking dishwsher ariston ls1 61
There is a lower door seal kit for this model, part number C00056475 at £28.91 inc VAT and delivery.
It may well be that causing the problem , but if it is actually overfilling then please refer to me earlier post.
If you’d like a seal ordered, drop me an email to spares@ukwhitegoods.com and I’ll arrange for you.
Dave.
Re: UK Whitegoods Meeting No.4 – Feb 2005
Beat me to it……. 😀
They are here for both Friday and Saturday:
http://www.ukwhitegoods.co.uk/modules.p … load&cid=9
Dave.
Re: servis washing machine
This could be major if the drum itself has buckled, although one complaint with these is the backplate spinning around which would also explain the leak.
Have a look at that as I think that’s where the problem lies, if it isn’t it’s probably time to replace it Andy.
Dave.
